Tomtom – ONE 30 Series – User Manual

Category: GPS Navigation System User Guides and Manuals

Download user manual for Tomtom – ONE 30 Series – User Manual 
Preview: Below is a preview of the manual as extracted from the PDF file


TomTom ONEWhat’s in the box 1.
2
What’s in the box
* Not included with all products.
EasyPort
TM
mount
Car Charger
RDS-TMC Traffic Receiver*
Documentation pack
USB cable
TomTom ONEGetting started 2.
3
Getting started
Install your TomTom ONE in your car following the instructions on the
installation poster at the start of this book.
To switch on your TomTom ONE, press and hold the On/Off button for 2
seconds. The first time you switch on your device, it may take a short while to
start.
You have to answer a few questions to set up your device.
Having problems?
In rare cases, your ONE may not start correctly or may stop responding to
your taps.
First, check that the battery is charged properly. To fully charge the battery,
you need to charge it for at least 2 hours.
If this doesn’t work, you can reset your device. To do this, press and hold the
Power button for fifteen seconds. Release the Power button when device
begins to restart.
Charging your TomTom ONE
Before you use your ONE for the first time, it’s a good idea to charge it fully
using the home charger, which takes about 2 hours.
There is no charging light on your ONE. To check the battery status and see
when your ONE is charging, switch on your device and tap the bottom right-
hand corner of the screen in the Driving View. The battery status is shown on
the next page.
Improving reception
If your TomTom ONE takes longer than 5 minutes to find your current
position, make sure that the device is in an open space away from tall objects
such as buildings or trees.
When you connect your TomTom ONE to your computer, you can use
TomTom HOME to download information about GPS satellite positions during
the next 7 days. This helps your ONE to find your position faster.
Important: Some vehicles have heat reflective shielding in the windshield.
This may prevent your ONE from locating your current position.
Take care of your TomTom ONE
Never leave your TomTom ONE or accessories in view when you leave the car
or they may become an easy target for thieves.4
You can set a password for your TomTom ONE which must be entered every
time you start your ONE.
It is important to take care of your ONE.
• Your ONE is not designed for use in extreme temperatures and any such
exposure may cause permanent damage.
• Do not open the casing of your ONE under any circumstances. Doing so
may be dangerous and will invalidate the warranty.
• Wipe or dry the screen of your ONE using a soft cloth. Do not use any liquid
cleaners.Driving View 3.
5
Driving View
When your TomTom ONE starts, you are shown the Driving View along with
detailed information about your current location.
Tap the center of the screen at any time to open the Main Menu.
Note: The Driving View is shown in black and white until your ONE locates
your current position.
ATap + and – to zoom in and out.
BYour current position.
CThe name of the next major road or road sign information, if applicable.
DTraffic bar – requires an RDS-TMC Traffic Receiver (available as an
accessory).
ENavigation instruction for the road ahead.
Tap this area to repeat the last spoken instruction and to change the
volume.
FThe name of the street you are on.
G Information about your trip such as trip time, remaining distance and arrival
time.
To change the information shown, tap Status bar preferences in the
Preferences menu.
HGPS signal strength.Making your first trip 4.
6
Making your first trip
Planning a route with your TomTom ONE is easy. To plan your first route,
follow the steps below.
Important: You should always plan your journey before you start driving. It is
dangerous to plan a route while driving.
1. Tap the screen to bring up the main menu.
Note: The buttons on your ONE are shown in full color unless a button is
currently unavailable. For example, the button named Find alternative… in
the Main Menu is not available until you have planned a route.
2. Tap Navigate to…
3. Tap Address.
When you enter an address, you can choose from the following options:
• City center – tap this button to set your destination as the center of a city
or town.
• Street and house number – tap this button to set an exact address as your
destination.
• ZIP code – tap this button to enter a ZIP code as your destination.
Note: You can enter a ZIP code for any country. In the UK and the Netherlands,
ZIP codes are detailed enough to identify a house on their own. In other 7
countries you can enter a ZIP code to identify a town or area. You will then
have to enter a street and house number.
• Cross street or intersection – tap this button to set your destination as the
point where two streets meet.
In this example, we will enter an exact address.
4. Tap Street and house number.
Note: When planning a trip for the first time your ONE asks you to choose a
country. Your choice is saved and used for all routes you plan.
You can change this setting at any time by tapping the country flag.
5. Start to type the name of the town where you want to go.
As you type, the names of the towns that match what you have typed are
shown. When your destination appears in the list, tap the name of the town
to set the destination.
6. Start to type the name of the street and select it when it is shown.
As with the name of the town, the names of the streets that match what you
have typed are shown. When your destination appears in the list, tap the
name of the street to set the destination.
7. Now enter the house number of your destination and then tap Done.
8. Your ONE asks if you need to arrive at a particular time. For this exercise,
tap NO.8
The route is calculated by your ONE.
9. When the route has been calculated, tap Done.
Your ONE will immediately begin to guide you to your destination, using both
spoken instructions and on-screen directions.
Arrival times
When you plan a route, your TomTom ONE asks you if you need to arrive at a
particular time.
Tap YES to enter a preferred arrival time.
Your ONE calculates your arrival time and shows you whether you will arrive
on time.
You can also use this information to work out when you need to leave. If your
ONE shows that you will arrive 30 minutes early, you can wait and leave in 30
minutes time, rather than arrive early.
Your arrival time is constantly recalculated during your trip. The status bar
shows whether you will arrive on time or if you are going to be late, as shown
below:
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before
the time you entered, it is shown in green.
You will arrive 3 minutes before the arrival time you entered.
If the estimated arrival time is less than 5 minutes before the
time you entered, it is shown in yellow.
You will arrive 19 minutes late.
If the estimated arrival time is later than the time you entered,
it is shown in red.
Status bar
preferences
Tap Status bar preferences in the Preferences menu, to enable or disable
arrival time notifications.
Select the required options on the first menu screen and then tap Done.
To enable arrival time notifications, select Show leeway to arrival time.9
What are the other navigation options?
When you tap Navigate to…, you can set your destination in many ways, not
just by entering the address. The other options are listed below:
Planning a route in advance
You can also use your ONE to plan trips in advance by selecting both your
starting point and your destination. You could, for example, do the following:
• Find out how long a trip is going to take before you start.
• Check the route of a trip you are planning.
Home
Tap this button to navigate to your Home location.
You will probably use this button more than any other.
Favorite
Tap this button to select a Favorite as your destination.
Address
Tap this button to enter an address as your destination.
Recent
destination
Tap this button to select your destination from a list of places you have
recently used as destinations.
Point of
Interest
Tap this button to navigate to a Point of Interest (POI).
Point on map
Tap this button to select a point on the map as your destination using the
map browser.
Latitude
Longitude
Tap this button to enter a destination using latitude and longitude values.
Position of
last stop
Tap this button to select your last recorded position, as your destination.
2 3 1 210
• Check a route for someone who is coming to visit you so you can explain
the route to them.
To plan a route in advance, follow these steps:
1. Tap the screen to bring up the main menu.
2. Tap the arrow button to move to the next menu screen and tap Prepare
route.
3. Select the starting point for your trip in the same way that you would select
your destination.
4. Set the destination for your trip.
5. Choose the type of route that should be planned.
• Fastest route – the route which takes the least time.
• Shortest route – the shortest distance between the locations you set. This
may not be the quickest route, especially if the shortest route is through
a town or city.
• Avoid freeways – a route which avoids freeways.
• Walking route – a route designed for making the trip on foot.
• Bicycle route – a route designed for making the trip on a bicycle.
• Limited speed – a route for a vehicle which can only be driven at a limited
speed. You have to specify the maximum speed.
6. Your TomTom ONE plans the route between the two locations you
selected.
More information about a route
You can access these options for the route you last planned by tapping the
Details button on the route summary screen.
You can then select from the following options:
Prepare route
Browse as
text
Tap this button for a list of all the turn instructions on the route.
This is very useful if you need to explain a route to someone else.
Browse as
images
Tap this button to see each turn in the trip. Tap the right and left arrows to
move forwards and backwards through the trip.
Tap the screen to turn off the 3D display and view the map from above.
Browse map
of route
Tap this button to see an overview of the route using the map browser.11
Show route
summary
Tap this button to open the route summary screen.Finding alternative routes 5.
12
Finding alternative routes
Once you have planned a route, you may want to change something about the
route, without changing your destination.
Why change the route?
Maybe for one of these reasons:
• You can see a roadblock or a line of traffic ahead.
• You want to travel via a particular location, to pick someone up, stop for
lunch or fill up with gas.
• You want to avoid a difficult intersection or a road you don’t like.
Find alterna-
tive…
Tap Find alternative… in the Main Menu to change the route that is
currently planned.
Then tap one of the options below.
Calculate
alternative
Tap this button to calculate an alternative to the route already planned.
Your ONE will look for another route from your current location to your
destination.
If you decide you would prefer to use the original route after all, tap
Recalculate original.
Why would I need to do this?
Apart from the roads near your position and near your destination, the new
route will use totally different roads to reach your destination. This is an
easy way of calculating a totally different route.
Avoid
roadblock
T ap this button if you can see a roadblock or a line of traffic ahead. You then
have to choose how much of the route ahead you want to avoid.
Choose from the different options: 100m, 500m, 2000m, 5000m. Your ONE
will recalculate your route avoiding the section of the route for the distance
you selected.
Don’t forget that once a new route is calculated, you may have to turn off
the road you are on very soon.
If the roadblock suddenly clears, tap Recalculate original to return to your
original route.13
Travel via…
Tap this button to change your route so that it passes a particular location,
perhaps to pick someone up on the way.
You choose the location you want to pass in the same way as you choose a
destination. So you can select from all the same options: for example,
Address, Favorite, Point of Interest and Point on map.
Your ONE will calculate a new route to your destination that passes the
location you chose. Unlike your final destination, your ONE does not inform
you when you pass by this location.
Recalculate
original
Tap this button to return to the original route without deviations to avoid
roadblocks or traveling via particular locations.
Avoid part of
route
Tap this button to avoid a part of the route. Use this button if you see that
your route includes a road or junction you don’t like, or which is well-
known for traffic problems.
You then choose the road you want to avoid from a list of the roads on your
route.
Minimize
delays
T ap this button to recalculate your route so that it avoids traffic problems as
much as possible. Your ONE will check if there are any traffic problems on
your route and work out the best route to avoid the problems.
Note: This button is only available with TomTom Traffic enabled.Sounds and voices 6.
14
Sounds and voices
The sound on your TomTom ONE is used for features such as:
• Spoken instructions
• Warnings
How do I change the volume level?
You can change the volume in three ways:
• Tap the bottom left hand area of the Driving View. The last spoken
instruction is repeated and the volume level is shown.
Move the volume slider to adjust the volume.
• In the Main Menu, tap Change preferences, then tap Volume preferences.
Tap Test to check your changes.
Selecting a voice
Voice
preferences
To change the voice being used by your TomTom ONE, tap Voice
preferences in the Preferences menu, then tap Change voice. Select a voice
from the list.Help me! 7.
15
Help me!
Help me! provides an easy way to navigate to emergency services centers and
other specialist services and contact them by phone.
For example, if you are involved in a car accident, you could use Help me! to
call the nearest hospital and tell them your exact location.
How do I use Help me! to call a local service?
You can use Help me! to find and make contact with a service center.
To use Help me! to locate a service center, contact the center by phone and
navigate from your current location to the center, do the following:
1. Tap the screen to bring up the main menu.
2. Tap Help me!
3. Tap Phone for help.
4. Select the type of service you require, for example, Nearest hospital.
5. To dial, select a center from the list, the nearest is shown at the top of the
list.
Once the call is answered your ONE shows your position on the map along
with a description of the location. This helps you explain where you are
while making a call.
6. To navigate your way to the center on foot, tap Walk there.
Your ONE starts guiding you to your destination.16
Options
Phone for help
Use your TomTom ONE to find the location of a service and the contact
details.
• Emergency services
• Emergency breakdown services
• Nearest police station
• Nearest doctor
• Nearest hospital
• Nearest public transport
• Nearest car repair services
• Nearest dentist
• Nearest pharmacy
• Nearest vet
Note: In some countries, information may not be available for all services.
Drive to help
Use your TomTom ONE to navigate your way by road to a service center.
• Nearest car repair services
• Nearest hospital
• Nearest doctor
• Nearest police station
• Nearest pharmacy
• Nearest dentist
Note: In some countries, information may not be available for all services.
Walk to help
Use your TomTom ONE to navigate your way on foot to a service center.
• Nearest gas station
• Nearest public transport
• Nearest police station
• Nearest pharmacy
• Home
• Nearest doctor
Note: In some countries, information may not be available for all services.
Where am I?
Your TomTom ONE shows your current location.
You can then tap Phone for help to select the type of service you want to
contact.17
First Aid
Guide
Tap this button to read the British Red Cross First Aid guide.
Other guides
Tap this button to read a selection of useful guides.Favorites 8.
18
Favorites
What are Favorites?
Favorites are places that you often visit. You can create Favorites so that you
don’t have to enter the address every time you want to navigate there.
They don’t have to be places you especially like, just useful addresses.
How can I create a Favorite?
From the Main Menu, tap Add Favorite.
Note: The button Add Favorite may not be shown on the first page of the Main
Menu. Tap the arrow to open other pages in the Main Menu.
You can then select the location of the Favorite from the list below.
Give your Favorite a name that is easy to remember. Your ONE will always
suggest a name, usually the address of the Favorite. To enter the name, just
start typing. You don’t have to delete the suggested name.
Home
You can set your Home location as a Favorite.
Favorite
You cannot create a Favorite from another Favorite. This option will always
be unavailable in this menu.
To rename a Favorite, tap Manage Favorites in the Preferences menu.
Address
You can specify an address to be a Favorite. When you enter an address,
you can choose from four options.
• City center
• Street and house number
• ZIP code
• Crossing or intersection
2 3 1 219
Recent
destination
Select a Favorite location from a list of places you have recently used as
destinations.
Point of
Interest
You can add a Point of Interest (POI) as a Favorite.
Does it make sense to do this?
If you visit a POI you particularly like, for example a restaurant, you can add
it as a Favorite.
To add a POI as a Favorite, tap this button, then do the following:
1. Narrow your choice of POIs by selecting the area where the POI is.
You can select one of these options:
• POI near you – to search from a list of POIs near your current position.
• POI in city – to choose a POI in a particular town or city. You have to
specify a town or city.
• POI near Home – to search from a list of POIs near your Home
location.
If you are currently navigating to a destination, you can also select from
a list of POIs which are on your route or near your destination. Choose
one of these options:
• POI along route
• POI near destination
2. Select the category of POI.
Tap the category of POI if it is shown or tap the arrow to choose from
the complete list.
Tap Any POI category to search for a POI by name.
My location
Tap this button to add your current position as a Favorite.
For example, if you stop somewhere interesting, while you are there you
can tap this button to create the Favorite.
Point on map
Tap this button to create a Favorite using the map browser.
Select the location of the Favorite using the cursor, then tap Done.
Latitude
Longitude
Tap this button to create a Favorite by entering latitude and longitude
values.
Position of
last stop
Tap this button to select your last recorded position as your destination.20
How can I use a Favorite?
You will normally use a Favorite as a way of navigating to a place without
having to enter the address. To navigate to a Favorite, do the following:
1. Tap the screen to bring up the main menu.
2. Tap Navigate to…
3. Tap Favorite.
4. Select a Favorite from the list.
Your ONE calculates the route for you.
5. When the route is calculated, tap Done.
Your ONE will immediately start guiding you to your destination with spoken
instructions and visual instructions on the screen.
How can I change the name of a Favorite?
1. Tap the screen to bring up the main menu.
2. Tap Change preferences to open the Preferences menu.
3. Tap Manage Favorites.
4. Tap the Favorite you want to rename.
5. Tap Rename.
How can I delete a Favorite?
1. Tap the screen to bring up the main menu.
2. Tap Change preferences to open the Preferences menu.
3. Tap Manage Favorites.
4. Tap the Favorite you want to delete.
5. Tap Delete.Browse map 9.
21
Browse map
To look at the map in the same way as you might look at a traditional paper
map, tap Browse map in the Main Menu.
You can move the map by touching the screen and moving your finger across
the screen.
AThe scale bar
BYour current position.
CGPS button
Tap this button to center the map on your current position.
DOptions
EThe cursor
FThe Find button
Tap this button to find specific addresses.
GThe Cursor button
Tap this button to navigate to the cursor position, make a Favorite of the
cursor position, or find a Point of Interest near the cursor position.
HThe zoom bar
Zoom in and out by moving the slider.
Cursor button
You can use the cursor to find addresses and Points of Interest (POIs), for
example, restaurants, train stations and gas stations. 22
Position the cursor over a location on the map, then tap one of the following
buttons:
Navigate
there
Tap this button to navigate to the cursor position. Your ONE will calculate
the route.
Find POI
nearby
Tap this button to find a POI near the cursor position. For example, if you
have found a restaurant to go to, you can search for a parking garage
nearby.
Center on
map
Tap this button to bring the location currently highlighted by the cursor to
the center of the screen when looking at the map.
Add as
Favorite
Tap this button to create a Favorite at the cursor position.
Correct
location
Tap this button to correct the location shown at the cursor position.Points of Interest 10.
23
Points of Interest
Points of Interest or POIs are useful places on the map. Here are some
examples:
• Restaurants
•Hotels
•Museums
• Parking garages
• Gas stations
Navigating to a POI
You can use a POI as your destination. For example, if you are traveling to an
unfamiliar city, you could choose a POI to help find a parking garage.
1. Tap the screen to bring up the main menu.
2. Tap Navigate to… in the Main Menu.
3. Tap Point of Interest.
4. Tap POI in city.
5. Narrow your choice of POIs by selecting the area where the POI is located.
You can select one of these options:
• POI near you – to choose from a list of POIs near to your current location.
• POI in city – to find a POI in a particular town or city.
• POI near Home – to choose from a list of POIs near to your Home location.
You can select from a list of POIs which are along your route or close to your
destination. Choose from one of these options:
• POI along route
• POI near destination
Note: The last POI you viewed is also shown so that you can plan a route there
more quickly.
6. Type the name of the town you want to visit and select the town when it
appears in the list.
7. Select the category of POI:
Tap Any POI category to search for a POI by category name.
Tap the category of POI, if it is shown.24
Tap the arrow to choose from the complete list of categories. Select the
category from the list or start to type the name of the category and select it
when it appears in the list.
8. Tap Parking garage.
9. From the list of POIs shown, select the POI you want to navigate to.
The table below explains the distances listed next to each POI.
If you know the name of the POI, tap Find and type the name. Select it from
the list when it is shown.
The next screen shows more detailed information including the location of
the POI on the map and the phone number of the POI, if available.
Tap Select to confirm you want to plan a route to this POI.
Once you have selected a POI, the route to the POI is calculated by your
TomTom ONE.
Showing POIs on the map
1. Tap Show POIs on map in the Preferences menu.
2. Select the POI categories to display on the map.
Tap Find to search for a POI by name.
3. Tap Done.
The POIs you have selected are shown as symbols on the map.
How can I set warnings for POIs?
1. Tap the screen to bring up the main menu.
2. Tap Change preferences.
3. Tap Warn when near POI.
POI near you Distance from your current location
POI in city Distance from the city center
POI near Home Distance from your Home location
POI along
route
Distance from your current location
POI near
destination
Distance from your destination
Show POI on
map25
4. Select the category of POI you want to be warned about.
Select the category from the list or start to type the name of the category
and select it when it is shown in the list.
5. Set how close the POI should be when you receive a warning.
6. Choose the warning sound for the category of POI you selected.
Warn when
near POI
Tap this button to receive a warning when you travel near to the location
of a POI.Preferences 11.
26
Preferences
Use night colors / Use day colors
Show POI on map
Use night
colors
Tap this button to reduce the brightness of the screen and show darker
colors on the map.
When should I use this?
When it’s dark, it is easier to see the screen if the display on your ONE is not
brightly lit.
Use day colors
To change back to a brighter screen showing brighter colors on the map,
tap Use day colors.
Show POI on
map
Tap this button to set which categories for the Points of Interest (POIs)
should be shown on the map:
1. Tap Show POIs on map in the Preferences menu.
2. Select the POI categories to display on the map.
Tap Find to search for a POI category.
3. Tap Done.
The POIs you have selected are shown as symbols on the map.27
Safety preferences
What happens when I use the Turn off map display option?
When you turn off the map display, instead of seeing your position on a map
in the Driving View, you will only see information about the next instruction.
Tap the button and select an option for when the map should be turned off.
These are the options:
• Always – The map will not be shown and you will only see information
about the next instruction and arrows showing direction.
• Above a certain speed – you set the speed at which point the map will be
turned off. This option is useful for situations when the map might be
distracting, such as when you are driving fast.
• Never – the map is never turned off.
Guided tours
Safety
preferences
Tap this button to set the following safety preferences:
• Hide most menu options while driving
• Suggest driving breaks
• Show safety reminders
• Warn when near places of worship or schools
• Warn when driving faster than allowed
• Warn when driving faster than a set speed
• Warn not to leave the device in the car
If you select one or more of the warnings, you will also be asked to select a
sound to be played whenever a warning is displayed.
Select whether or not your TomTom ONE should warn you about which
side of the road you should be driving on.
Decide if you want the map display to be turned off in special
circumstances and press Done.
Guided tours
Tap this button to show one of the Guided tours on how to use your
TomT om ONE.28
Turn off sound / Turn on sound
Volume preferences
Manage Favorites
Turn off sound
Tap this button to turn off sound. If you turn off the sound, warnings for
upcoming POIs are also turned off.
The button changes to Turn on sound.
Tips
To change the volume, tap Volume preferences in the Preferences menu.
To change the volume quickly while you are driving, tap the bottom left-
hand section of the Driving View and move the slider.
To change the voice being used by your ONE, tap Change voice in the
Voice preferences menu.
Volume
preferences
Tap this button to change the volume.
Manage
Favorites
Tap this button to rename or delete Favorites.
To find a Favorite quickly, tap Find, then start to type the name of the
Favorite. As soon as the Favorite is shown in the list, you can select it. 29
Status bar preferences
Change voice
Warn when near POI
Status bar
preferences
Tap this button to select the information shown on the status bar:
• Remaining time – the estimated time left until you reach your destination.
• Remaining distance – the distance left until you reach your destination.
• Current time
• Arrival time – your estimated arrival time.
• Speed
• Direction
• Show next street name – the name of the next street on your trip.
• Show current street name
• Show leeway to arrival time – your ONE shows how late or early you will
be compared with the preferred arrival time that is set during the
planning of a route.
• Show max speed next to speed – only available when speed (above) is
also selected.
• How should the status bar be displayed?
Horizontal – If you choose this option, the status bar will be shown at the
bottom of the Driving view.
Vertical – If you choose this option, the status bar will be shown at the
right-hand side of the Driving view.
Note: If the speed limit for the road you are on is available, it is shown next
to your speed.
If you drive faster than the speed limit, your speed is shown in red.
Change voice
Tap this button to change the voice that is used for announcing command
directions.
Warn when
near POI
Tap this button to announce a warning when your are approaching a Point
of Interest. 30
Change 2D/3D display / Turn on 2D display
When should I use this?
In some situations, it is easier to see the map from above. Perhaps if the road
network is complicated or for times when you are walking while using your
ONE to navigate.
Name preferences
Change Home location
Do I need to use my actual home address for the Home location?
No. Your Home location can be a place you go often, for example, your office.
It can be your actual home address, but it can also be any address you like.
Why should I set a Home location?
Having a Home location means that you have a quick and easy way to navigate
there, by tapping the Home button in the Navigate to… menu
Turn on 2D
display
Tap Turn on 2D display to change the perspective for viewing the map.
For example, the 2D view shows a two dimensional view of the map as
though viewed from above.
Change 2D/3D
display
To switch the view to a three dimensional perspective, tap Change 2D/3D
display and select a view from the list.
Name
preferences
Tap this button to set the information that is shown on the map in the
Driving View. The following options are available:
• Show house number before street name
• Show street names – if you are using a computer voice for spoken
instructions and have selected that street names should be read aloud,
you do not need to select this option, since the street names will be read
aloud even though this option is not selected.
• Show next highway / signpost – when this option is selected, the next
major road on your route is shown at the top of the screen in the Driving
View.
• Show current street name on map
Change Home
location
Tap this button to set or change your Home location. 31
Manage maps
Planning preferences
Change language
Manage maps
Tap this button to do the following:
• Download a map – tap this button to download a map you have bought
using TomTom HOME. It may not be possible to download maps on all
devices.
• Switch map – tap this button to change the map you are using.
• Download free map corrections – tap this button to download map
corrections provided as part of the Map Share service.
• Delete a map – tap this button to delete a map. This might be necessary
to create more space on your ONE, for example when you want to load
a different map.
Note: Don’t delete a map unless you have already made a backup of the
map. If you delete a map before you make a backup, you will no longer be
able to load the map on your ONE.
Use TomTom HOME to make backups, download, add and delete maps
from your navigation device.
Planning
preferences
Tap this button to set the kind of route planned when you select a
destination.
The following options are available:
• Ask me every time I plan
• Always plan fastest routes
• Always plan shortest routes
• Always avoid freeways
• Always plan walking routes
• Always plan bicycle routes
• Always plan for limited speed
You can then set if the route summary screen closes automatically after you
have planned a route. If you select No, you have to tap Done to close the
route summary screen.
Change
language
Tap this button to change the language used for all the buttons and
messages you see on your ONE.
You can choose from a wide range of languages. When you change the
language, you are also given the opportunity to change the voice. 32
Set owner
Operate left-handed / Operate right-handed
Brightness preferences
Change map colors
Set owner
Tap this button to enter your name and address as the owner of your ONE
and to change or delete a 4-digit password for your ONE.
Note: You can only change or delete a 4-digit password on your
TomTom ONE.
You can create a 4-digit password for your ONE using TomTom HOME:
1. Connect your ONE to your computer and turn on your ONE and your
computer.
TomTom HOME starts automatically.
2. Click on Operate my ONE in TomTom HOME.
Your ONE appears and can be controlled using TomTom HOME.
3. From the Main Menu, click Change preferences.
4. Click Set Owner. You can now set a 4-digit password for your ONE.
You can only create a 4-digit password using TomTom HOME.
Operate left-
handed
Tap this button to move important buttons, for example, the Done and
Cancel buttons as well as the zoom bar, to the left hand side of the screen.
This makes it easier to tap the buttons with your left hand without blocking
the screen.
To move the buttons back to the right hand side of the screen, tap Operate
right-handed.
Brightness
preferences
Tap this button to set the brightness of the screen.
Move the sliders to set the brightness separately for day map colors and for
night map colors.
You can set the map color scheme by tapping Change map colours.
Change map
colors
Tap this button to select the color schemes for day and night map colors.
You can also download more color schemes from TomTom Services.33
Set units
Set clock
Keyboard preferences
Set units
Tap this button to set the type of units that will be shown for the following:
•Distance
•Time
• Latitude and longitude
• Temperature
• Air pressure
Set clock
Tap this button to select the type of clock that is shown and set the time.
The easiest way to set the time is by tapping the Sync button. Your ONE will
then take the time from GPS information.
Note: After using Sync to set the time, you may have to adjust the hours
depending on your time zone. Your ONE works out your time zone and
always keeps the time correct using GPS information.
You can only use Sync if you have GPS reception, so you cannot set the
clock in this way when you are indoors.
Keyboard
preferences
You use the keyboard to enter your destination or to find an item in a list,
such as a POI.
Tap this button to select the size of the keys on the keyboard and the
keyboard layout. You can select from two sizes:
• Large keyboard
• Small keyboard
Three keyboard layouts are available:
• ABCD keyboard
• QWERTY keyboard
• AZERTY keyboard34
Compass preferences
Reset factory settings
Compass
preferences
Tap this button to configure the compass. The following options are
available:
• None – the compass is not shown.
• One with arrow pointing north – the arrow always points towards north
and the direction you are moving is shown at the top of the compass.
• One with arrow showing your heading – the arrow always shows the
direction you are moving.
If you select one of these options, you then need to select the features
that are shown in the middle of the arrow:
• Direction – your direction is shown as a compass point, displayed in
the center of the compass arrow.
• Degrees – your direction is shown as compass degrees, displayed in
the center of the compass arrow.
• Nothing
• One with arrow pointing to your destination – the arrow always points
towards your destination. The distance to your destination is displayed
in the compass arrow.
Reset factory
settings
Tap this button to restore the factory settings to your TomTom ONE.
All your settings, including Favorites, your Home location, warnings for
POIs and any Itineraries you have created are deleted.TomTom Map Share 12.
35
TomTom Map Share
TomTom Map Share
TM
is a free service that lets you make updates to your
map and if you want to, share those updates with other members of the
TomTom Map Share community.
If you find a street that has recently been blocked to traffic but was open
before, you can use Map Share to update your map and then share the update
with other Map Share members.
You can use Map Share to send and receive map updates during the first year
after the map’s release date. This means that one year after the release date,
you will no longer be able to send or receive map updates for that version of
the map – You will still be able to make updates to your own map for use on
your own device.
When you join the TomTom Map Share community you can keep your maps
up-to-date with the latest updates made by other Map Share community
members.
You choose the type of updates you want and each time you connect your
TomTom ONE to TomTom HOME, the map is automatically updated.
Map updates
There are two types of map update:
• Updates that are immediately shown on the map. These include, changing
the traffic flow of a street, blocking or renaming a street and adding or
editing POIs.
This type of change is immediately shown on your own map. You can hide
these updates at any time in the Map Share preferences menu.
• Updates that are reported to TomTom but not shown immediately on your
map. These include, missing streets, errors in freeway entrances and exits
and missing roundabouts.
This type of update is investigated by TomTom and once verified, is included
in the next map release. These updates are therefore not shared with the Map
Share community.36
Making a map update
Receiving the latest map updates
When you connect your TomTom ONE to your computer, TomTom HOME
automatically downloads any available map updates and sends any changes
you have made, to the Map Share community.
There are several types of updates which can be set in the Correction
preferences menu.
Marking a map error while on the move
If you notice an item on your map that needs attention, you can mark the
location using the Report button and then enter the details when you are no
longer driving.
To show the Report button in the Driving View, do the following:
1. Tap Map corrections in the Main Menu.
2. Tap Correction preferences.
3. Tap Done and then tap Done again.
4. Select Show report button, then tap Done.
The Report button is shown on the left-hand side of the Driving View. After
you mark a location, you can add more information about the change when
you open the Map corrections menu.
For example, you are driving to a friend`s house and you notice that the name
of the street you are on is different from the one on your map. To report the
change, tap the Report button and your ONE will save your current location.
You can then send the update to TomTom Map Share when you have finished
your trip.
TomTom Map Share community
To join the Map Share community, do the following:
1. Tap Map corrections in the Main Menu.
2. Tap Download corrections made by others.
3. Tap Join.
Correct a map
error
1. Tap Map corrections in the Main Menu.
2. Tap Correct a map error.
A list of possible map updates is shown.
3. Select the type of update you want to report.
Note: If you tap Add missing POI or Report other error you will be asked for
some additional information before the next step.
4. Select the method you want to use for selecting the location of the
update.
5. When you have found the location, tap Done.
6. Enter update or confirmation of update now.37
When you connect your TomTom ONE to computer, TomTom HOME
automatically downloads any available map updates and sends any changes
you have made, to the Map Share community.
Changing my preferences for map updates
Correction preferences is used to set the way TomTom Map Share runs on
your device.
You can set the following preferences:
• Choose what types of updates you want to use on your maps.
• Decide if you want to share your updates with others.
• Show or hide the Report button in the Driving View.
To set your preferences, do the following:
1. Tap Map corrections in the Main Menu.
2. Tap Correction preferences.
A list of update types is shown.
3. Tick the box next to each update type you want use.
4. Tap Done.
5. Choose how you want to share your map updates with the Map Share
community, then tap Done.
6. Choose if you want to see the Report button in the Driving View.
7. Tap Done.
Tip: If you later decide you want to remove updates from the map, clear the
checkbox next to the types of update you want to remove. If you clear all the
checkboxes, your map returns to the original state before the first update.
Map update categories
There are several types of update that you can make to a map. 38
To make an update to your map, tap Map corrections in the Main Menu then
tap Correct a map error. The following types of updates are shown.
(Un)block
street
Tap this button to block or unblock a street. You can block or unblock the
street in one or both directions.
For example, to correct a street near to your current location, do the
following:
1. Tap (Un)block street.
2. Tap Near you to select a street near your current location. You can select
a street by name, a street near your Home location or a street on the
map.
3. Select the street or section of a street you want to correct by tapping it
on the map.
The street you select is highlighted and the cursor shows the name of
the street.
4. Tap Done.
Your device shows the street and whether the traffic is blocked or
allowed in each direction:
5. Tap one of the direction buttons to block or unblock the flow of traffic in
that direction.
6. Tap Done.
The next time you connect your device to TomTom HOME, your updates
are shared with the TomTom Map Share community.
Reverse traffic
direction
Tap this button to correct the traffic direction of a one-way street, where the
direction of traffic is different to the direction shown on your map.
Note: Reverse traffic direction only works for one-way streets. If you select
a two-way street you will be given the chance to block/unblock the street
rather than changing the direction.39
Edit street
name
Tap this button to change the name of a street on your map.
For example, to rename a street near to your current location:
1. Tap Edit street name.
2. Tap Near you.
3. Select the street or section of a street you want to correct by tapping it
on the map.
The street you select is highlighted and the cursor shows the name of
the street.
4. Tap Done.
5. Type the correct street name.
6. Tap Done.
Change turn
restrictions
Tap this button to change and report incorrect road turn directions.
Change road
speed
Tap this button to change and report road speed limit.
Add missing
POI
Tap this button to add a new Point of Interest (POI).
For example to add a new restaurant near to your current location:
1. Tap Add missing POI.
2. Tap Restaurant in the list of POI categories.
3. Tap Near you.
4. Select the location of the missing restaurant.
You can select the location by entering the address or by selecting the
location on the map. Select Near you or Near home to open the map at
your current location or at your Home location.
5. Tap Done.
6. Type the name of the restaurant then tap OK.
7. If you know the telephone number of the restaurant you can type it, then
tap OK.
If you don’t know the number, just tap OK without typing a number.
sdjvfbks vk
vabckc sdn
6040
Edit POI
Tap this button to edit an existing POI.
You can use this button to make the following changes to a POI:
• Delete the POI.
• Rename the POI.
• Change the telephone number of the POI.
• Change the category that a POI belongs to.
• Move the POI on the map.
Report other
error
Tap this button to report other types of update.
These updates are not immediately corrected on your map. Your
TomTom ONE sends a special update report to TomTom Map Share.
You can report missing streets, errors in freeway entrances and exits and
missing roundabouts. If the update you want to report is not covered by
any of these report types, enter a general description then tap Other.Traffic Information using RDS-TMC 13.
41
Traffic Information using RDS-TMC
The Traffic Message Channel (TMC)
You can receive traffic information on your TomTom ONE using the TomTom
RDS-TMC Traffic Receiver. The TMC transmits traffic information as a radio
signal.
Tip: The TomTom RDS-TMC Traffic Receiver is included with some products
and available as an accessory for others. Visit tomtom.com for more
information.
The Traffic Message Channel (TMC) is not a TomTom Service. FM radio
stations in several countries broadcast TMC information as part of their
programming. TMC is also known as RDS-TMC traffic information.
Your TomTom navigation device uses this information to warn you about
traffic delays along your route and how you can avoid them.
Note: TomTom is not responsible for the availability or quality of traffic
information provided by TMC.
TMC is not available in all countries or regions. Visit tomtom.com to check if
it is available in your country or region.
Setting up TMC
To start using TMC all you need to do is connect the RDS-TMC Traffic Receiver
to your TomTom navigation device.
Important: When you install your navigation device in your car, don’t block
the driver’s view of the road.
1. Connect the RDS-TMC Traffic Receiver to your navigation device.
2. Connect the Car Charger to the RDS-TMC Traffic Receiver and then plug the
Car Charger into your car’s cigarette lighter socket.
Note: The RDS-TMC receiver does not work if the Car Charger is not
connected.
3. Place the transparent suction cup at the tip of the antenna firmly against the
upper left hand corner of your car windshield.42
4. Then place the remaining suction cups along the edge of the windshield, as
shown, keeping the cable straight.
5. Switch on your navigation device.
The Traffic bar is shown in the Driving View and your navigation device
searches for a radio station that carries RDS-TMC information.
These symbols are shown at the top of the traffic sidebar:
Using RDS-TMC traffic information
Changing traffic preferences
Use the Change Traffic preferences button to choose how traffic information
works on your device.
Your ONE has the latest RDS-TMC traffic information.
Your ONE is waiting to download the latest RDS-TMC traffic
information as soon as it is available.
Your ONE is searching for a radio station that carries RDS-TMC
traffic information.
As soon as you start receiving traffic information, the traffic sidebar is
shown on the right side of the Driving View. The traffic sidebar warns you
about any traffic incidents on your route.
In this example, there is a traffic jam on your route 9 kilometers ahead that
will cause an expected delay of 38 minutes.
To find the quickest route to your destination, do the following:
1. Tap the Traffic sidebar.
2. Tap Minimize traffic delays.
Your device looks for the quickest route to your destination.
The new route may also include traffic delays, or may even be the same
route as before.
3. Tap Done.43
Making commuting to work easier
The Home to work or Work to home buttons in the Traffic menu lets you
check your route to and from work with one tap of a button. When you use
either of these buttons, your device checks the route for possible delays, and
if it finds any, provides you with the possibility to avoid them.
The first time you use Home to work, you must set your traffic home and work
locations, do the following:
You can now use the Home to work and Work to home buttons of the Show
home-work traffic menu.
For example, to check for delays on your route home, do the following:
Change
Traffic
preferences
To change your traffic preferences, do the following:
1. Tap the TomTomTraffic button in the Main Menu on your device.
2. Tap Change Traffic preferences.
You can change the following preferences:
• Automatically minimize delays after every traffic update – if you select
this option, your device automatically recalculates when new delays
occur on your route.
• Beep when traffic situation on route changes – if you select this option
your device beeps when a new traffic incident occurs on your current
route.
• Ask for traffic updates when preparing a route – this option has no
effect in RDS traffic.
3. Select or clear the check box next to each preference you want to change.
4. Tap Done.
Your device lists the countries that have radio stations providing RDS-
TMC traffic information that you can currently receive. Normally you can
leave this set to Any country (strongest signal).
5. Tap Done.
Change home-
work
1. Tap the TomTomTraffic button in the Main Menu on your device.
2. Tap Show home-work traffic.
3. Tap Change home-work
4. Set your home location
5. Set your work location.44
1. Tap the TomTomTraffic button in the Main Menu on your device.
2. Tap Show home-work traffic.
3. Tap Work to home.
The route summary screen is shown, with the expected delay shown after the
trip time.
To see if there is a quicker way home, tap Find alternative then tap Minimize
traffic delays.
Tip: You can let your device automatically look for alternative routes by
selecting Automatically minimize delays after every traffic update in the
Traffic preferences.
Checking traffic incidents in your area
Get an overview of the traffic situation in your area, using the map. To find
local incidents and their details, do the following:
Browse map
1. Tap the TomTomTraffic button in the Main Menu on your device.
2. Tap Browse map.
The map browser screen is shown.
3. Tap the blue compass image in the top right of the screen.
The map centers itself on your current location, and any traffic incidents
in the area are shown as small symbols.
4. Tap on any traffic incident to get more information.
A second screen is shown that gives you detailed information about the
incident you chose. To display information about surrounding incidents
use the left and right arrows at the bottom of this second screen.45
Setting the radio frequency for RDS-TMC information
If you know the frequency of a particular radio station you want to use for RDS-
TMC traffic information, do the following to set the frequency manually:
To activate this feature, you must first enable manual tuning. To do this, tap
the Traffic bar in the Driving View, then tap Change Traffic preferences. Select
Tune manually by entering a frequency and then tap Done.
Your TomTom device looks for your radio station. If it doesn`t find a radio
station at the frequency you set, it automatically continues to search for the
next available station.
Choosing the correct country for RDS-TMC reception
If you are driving close to a country border, your device may tune to a radio
station from a neigboring country. If this happens you will only receive RDS-
TMC traffic information for that country. To set the country you want to receive
traffic information for, do the following:
1. Tap the Traffic sidebar in the Driving View.
2. Tap Change Traffic preferences.
A list of preferences you can choose is shown.
3. Tap Done.
A list of neigboring countries is shown.
4. Tap on the country that you want to receive traffic reports for.
Your TomTom device then searches for a radio station in the country you have
chosen.
The Traffic sidebar
The Traffic sidebar is shown on the right side of the Driving View when
TomTom Traffic is switched on. The Traffic sidebar shows you the traffic
incidents on your route. It shows the following information:
• A symbol for each traffic incident in the order they occur along your
planned route.
• The estimated delay to the next traffic incident on your route.
• The distance from your current location to the next incident on your route.
An example of a Traffic sidebar is shown below.
Tune manually
1. Tap the Traffic sidebar in the Driving View.
2. Tap Tune Manually.
3. Enter the frequency of the radio station.
4. Tap Done.46
In the example, the Traffic sidebar shows you that there are two incidents
ahead. Both incidents are traffic jams, the first is 15km ahead and is expected
to delay you by at least 51 minutes.
To re-plan your route to avoid these incidents, tap the Traffic sidebar to open
the TomTom traffic menu, then use Minimize traffic delays.
Traffic incidents
Traffic incidents are displayed both on the Driving View and also on the Traffic
sidebar as small symbols. There are two type of symbols:
• Symbols shown in a red square are incidents that Traffic can help you avoid.
• Symbols shown in a red rectangle are weather related, because of their
nature, you cannot use Traffic to avoid them.
Traffic incident symbols and their meaning are shown below:
Weather related symbols and their meaning are shown below:
Accident Road closed
Road works Traffic incident
One or more lanes
closed
Traffic jam
Fog Ice
Rain Snow
Wind
Note: The incident avoided symbol is shown for any traffic incident that
you avoid using TomTom Traffic.47
Traffic menu
Tap the Traffic sidebar in the Driving View to open the Traffic menu. The
following buttons are available:
Minimize
traffic delays
Replans your route based on the latest traffic information.
Show home-
work traffic
Checks the traffic along your Home to Work route.
Show traffic on
route
Tap this button to show areas of traffic congestion along your current
route.
Browse map
Shows an overview of traffic incidents on the map.
Change Traffic
preferences
Changes the settings for Traffic services.Introducing TomTom HOME 14.
48
Introducing TomTom HOME
TomTom HOME is a free application for your computer that helps you manage
the contents of your TomTom device. Connect to HOME frequently to get the
latest updates for your device.
You can, for example, do the following:
• Manage maps, voices, POIs and more.
• Buy TomTom services and manage your subscriptions.
• Update your TomTom with the latest software and services automatically.
• Read the full version of the user manual.
Tip: To get the most from HOME, we recommend using a broadband internet
connection.
Installing TomTom HOME
To install TomTom HOME on your computer, do the following:
1. Connect your computer to the internet.
2. Connect your device to your computer using the USB cable, then switch
your device on.
HOME starts to install.
Note: If HOME does not install automatically, you can also download it from
tomtom.com/home
Once installed, TomTom HOME starts automatically when you connect your
device to your computer and turn it on.Copyright notices 15.
49
Copyright notices
© 2008 TomTom International BV, The Netherlands. TomTom™ and the “two
hands” logo are among the trademarks, applications or registered trademarks
owned by TomTom International B.V. Our limited warranty and end user
license agreement for embedded software apply to this product; you can
review both at www.tomtom.com/legal
© 2008 TomTom International BV, Niederlande. TomTom™ und das Logo mit
den »zwei Händen« gehören zu den Warenzeichen, Anwendungen oder
registrierten Markenzeichen von TomTom International B.V. Für dieses
Produkt gelten unsere eingeschränkte Garantie und unsere
Endnutzerlizenzvereinbarung für integrierte Software, die Sie beide auf
www.tomtom.com/legal einsehen und nachlesen können.
© 2008 TomTom International BV, The Netherlands. TomTom™ et le logo
TomTom (“deux mains”) comptent parmi les marques commerciales, les
applications ou les marques déposées de TomTom International B.V.
L`utilisation de ce produit est régie par notre garantie limitée et le contrat de
licence utilisateur final relatif aux logiciels embarqués ; vous pouvez consulter
ces deux documents à l`adresse suivante : www.tomtom.com/legal
© 2008 TomTom International BV, Nederland. TomTom™ en het “twee-
handenlogo” maken onderdeel uit van de handelsmerken, applicaties of
geregistreerde handelsmerken in eigendom van TomTom International B.V.
Op dit product zijn onze beperkte garantie en licentieovereenkomst voor de
eindgebruiker van toepassing; beide zijn te vinden op www.tomtom.com/
legal
© 2008 TomTom International BV, The Netherlands. TomTom™ e il logo delle
“due mani” fanno parte dei marchi, delle applicazioni e dei marchi registrati di
proprietà di TomTom International B.V. La nostra garanzia limitata e il
contratto di licenza per l`utente finale vengono applicati a questo prodotto, è
possibile consultarli entrambi all`indirizzo www.tomtom.com/legal
© 2008 TomTom International BV, Países Bajos. TomTom™ y el logotipo “dos
manos” son marcas comerciales, aplicaciones o marcas registradas de
TomTom International B.V. Nuestra garantía limitada y nuestro acuerdo de
licencia de usuario final para el software integrado son de aplicación para este
producto; puede consultar ambos en www.tomtom.com/legal
© 2008 TomTom International BV, Países Baixos. TomTom™ e o logótipo das
“duas mãos” fazem parte das marcas comerciais, aplicações ou marcas 50
comerciais registadas cuja proprietária é a TomTom International B.V. A
nossa garantia limitada e contrato de licença de utilizador final relativas ao
software incorporado dizem respeito a este produto; pode consultar ambos
em www.tomtom.com/legal
© 2008 TomTom International BV, Holland. TomTom™ og logoet med “de to
hænder” er blandt de varemærker, produkter og registrerede varemærker, der
tilhører TomTom International B.V. Vores begrænsede garanti og
slutbrugerlicensaftale for indlejret software gælder for dette produkt; begge
dokumenter findes på www.tomtom.com/legal
© 2008 TomTom International BV, Nederländerna. TomTom™ och logotypen
“två händer” tillhör de varumärken, programvaror eller registrerade
varumärken som ägs av TomTom International B.V. Vår begränsade garanti
och vårt slutanvändarlicensavtal för inbyggd programvara kan gälla för denna
produkt. Du kan läsa dem båda på www.tomtom.com/legal
2008 TomTom™ ja “two hands” -logo ovat eräitä TomTom International B.V.:n
omistamia tavaramerkkejä, sovelluksia tai rekisteröityjä tavaramerkkejä.
Rajoitettu takuumme ja loppukäyttäjän käyttösopimuksemme sulautetuille
ohjelmistoille koskevat tätä tuotetta; voit tarkastaa molemmat
verkkosivuillamme www.tomtom.com/legal
© 2008 TomTom International BV, Nederland. TomTom™ og “de to hendene”-
logoen er blant de varemerker, programvarer og registrerte varemerker som
eies av TomTom International B.V. Vår begrensede garanti og lisensavtale
med sluttbruker for integrert programvare gjelder dette produktet. Du kan
lese om begge på www.tomtom.com/legal
© 2008 TomTom International BV, Holandia. Znak TomTom™ i logo z dwiema
d³oñmi nale¿y do znaków handlowych, aplikacji lub zastrze¿onych znaków
handlowych, których w³aœcicielem jest firma TomTom International B.V. Do
niniejszego produktu zastosowanie ma umowa licencyjna dla koñcowego
u¿ytkownika produktu oraz ograniczona gwarancja na wbudowane
oprogramowanie; oba dokumenty mo¿na przejrzeæ na stronie
www.tomtom.com/legal
© 2008 TomTom International BV, Nizozemsko. TomTom™ a logo se dvìma
dlanìmi patøí mezi obchodní znaèky, aplikace nebo registrované ochranné
známky ve vlastnictví spoleènosti TomTom International B.V. Na tento
produkt se vztahuje omezená záruka a smlouva s koncovým uživatelem pro
vestavìný software; do obou dokumentù mùžete nahlédnout na
www.tomtom.com/legal
© 2008 TomTom International BV, Hollanda. TomTom™ ve “two hands”
logoları TomTom International B.V.`ye ait ticari marka, uygulama veya kayıtlı
ticari markalardır. Sınırlı garantimiz ve katı ştırılmı ş yazılımın son kullanıcı
lisans sözle şmesi bu ürün içindir; www.tomtom.com/legal adresinden
ikisine de göz atabilirsiniz
© 2008 TomTom International BV, Hollandia. A TomTom™ és a “két kéz”
embléma is a TomTom International B.V. által birtokolt védjegyek, 51
alkalmazások és bejegyzett védjegyek közé tartozik. A korlátozott garancia és
a benne foglalt szoftver végfelhasználói licencszerz ődése érvényes erre a
termékre; melyeket a következ ő helyen tekinthet át

Leave a Comment