Sonim – RS60 – User Manual

Category: Cell Phone, Smartphone, Flip Phone, Pocket PC, and PDA User Guides and Manuals

Download user manual for Sonim – RS60 – User Manual 
Preview: Below is a preview of the manual as extracted from the PDF file


RS60
User GuidePower On/Power Off
Network & Internet
Power on for the First Time
Connected Devices
APPS & NOTIFICATIONS
Appearance Overview
CONTENTS
Unfasten Handstrap to Remove Battery Cover
Remove Battery Cover
SIM/microSD Card
Insert Battery
ACCESSIBILITY
Display Settings
Battery Settings
Sound Settings
Privacy Settings
Accessibility Settings
System Settings
Managing Contacts
3~4
5
6
7
8
10
11
12-14
15-16
17
17
21
21
22
23
23
24
24
25-26
27
28-31
What’s In the Box 2
Remove Battery 9
32-37
Product Safety Warnings 38-40
NOTICE 42-45
Managing Call Settings
Storage Settings
Google Settings
Sonim Scan
1Device
Type-C cable
Converter plugs
Battery Charging adaptor
1 What’s in the Box
Handstrap
22 Appearance Overview
Charging indicator
Earpiece
Light sensor
Back button
Side button
Front camera
Microphone
Home button
Recent button
Volume up
Volume down
Speaker
Power button Function button F1
Function Key 2 Function Key 3
3Battery cover lock
NFC
External antenna port
1D/2D Scanner
Rear camera
LED flash
TYPE-C interface
4Unfasten Handstrap to Remove Battery Cover 3
Figure 1 Figure 2
Figure 3 Figure 4
5Remove Battery Cover 4
1. Power off the device before removing the battery cover
2. Push the battery cover lock to the open position
3. Detach the battery cover
To remove the battery cover
Battery lock
65
To insert/remove SIM/microSD card
SIM/microSD Card
Follow the indicated direction printed in the chamber
microSD
SIM 1
SIM 2
76
To insert the battery
1. Insert the battery
2. Push the battery lock to the closed position
3. Attach the battery cover
4. Push the battery cover lock to the closed position
Insert Battery
DOWNLOAD THE USER GUIDE AT WWW.SONIMTECH.COM
Battery lock
8Remove Battery 7
1. Power off the device before removing the battery
2. Push the battery cover lock to the open position
3. Detach the battery cover
4. Push the battery lock to the open position
5. Remove the battery
To remove the battery
Battery lock
9Power on for the First Time
When starting for the first time, fully charge the device.
Plug the power adapter into the device and charge the device to make sure that battery is full.
8
10Power On/Power Off
1. Power On
Press the power button a few seconds until the device vibrates.
2. Enter/Exit Sleep Mode
Click the power button once, the screen enters sleep mode.
When the screen is lit up and there is no operation for one minute, the device will automatically
enter the sleep mode(Standby time setting: Display > Screen timeout).
Click the power button once, the screen lights up and exits sleep mode. Swipe up on the screen to
unlock.
3. Power Off/Restart/Screenshot
Long press the power button, a dialog box will pop up on the right side of the screen. Select the
desired function to turn off the power, restart or take a screenshot.
9
11Wi-Fi
Wi-Fi is a wireless network technology that can provide Internet access at distance up to 100 feet,
depending on the Wi-Fi router and surroundings.
You can access the Internet when you connect your RS60 to a Wi-Fi network. To connect your
phone to a Wi-Fi network;
1. From Notifications or App menu, tap on Settings ( ).
2. Tap on Network & Internet ( ) .
3. Tap on Wi-Fi ( ) .
4. Set the Wi-Fi to ON position located under Wireless & networks settings. A list of Wi-Fi access
points present within your phone accessible range are displayed.
5. Select your preferred network. Enter the WEP/WPS/WPA key (if it is a secured network) and
select Connect. To verify the password before connecting, enable Show password.
Add Network
1. On Wi-Fi screen, tap on Add network ( ).
2. Enter the Network name and select the Security from the drop-down list. You can set the
network password.
3. Tap on Advanced options. The settings such as Proxy and IP settings can be updated using the
drop-down list.
4. Tap on Save to save the network settings.
Connect To Network
1. Long press on connected network.
2. Tap on Connect to network.
3. Enter the network password.
4. The other network setting details such as Advanced options, Proxy, IP settings can be updated.
5. Tap on CONNECT to get connected to the network.
10
12
Network & Internet Mobile Network
1. From Notifications or App menu, tap on Settings( ).
2. Tap on Network & Internet ( ) > Mobile network ( ),
3. Select SIM card Slot and the following options are displayed:
• Mobile data: Turn On to enable mobile data. Using mobile data, you can access Internet.
• Roaming: Turn ON to enable data roaming to connect to data services while roaming.
• Data usage: Mobile data usage for a particular time frame is displayed.
• Network:
– Automatically select network: Turn ON to connect to the selected network automatically.
– Network: The network name is displayed.
– Access Point Names: Tap on Access Point
Names (APNs) to view and edit the network access points. Tap on the ( ) icon to add a new
access point.
Hotspot & Tethering
Hotspot and Tethering provides Internet to other devices through your mobile data connection.
Apps can also create a hotspot to share content with nearby devices.
13USB Tethering
Using USB tethering, you can share phone’s Internet connection via USB.
1. From Notifications or App menu, tap on Settings ( ).
2. Tap on Network & Internet( ) > Hotspot & tethering ( ).
3. Turn on USB tethering.
Bluetooth tethering
Share phone`s internet connection via Bluetooth Setup Mobile Hotspot
You can set up a hotspot using your mobile device.
1. From Notifications or App menu, tap on Settings ( ).
2. Tap on Network & Internet( ) > Hotspot & tethering ( ).
3. Tap on Set up Mobile hotspot.
4. Enter the following details:
• Hotspot name: Enter the hotspot name.
• Security: Select the desired security from the drop-down list.
• Hotspot Password: The password must have at least 8 characters.
5. Tap on Save to save the mobile hotspot.
SIM cards
From Notifications or App menu, tap on Settings ( ).
Select SIM card Slot and the following options are displayed:
1SIM 1.
2SIM 2.
3Preferred SIM for Cellular dataCallsSMS messages.
Airplane Mode
When your phone is set in airplane mode, network connectivity or mobile data connectivity is
disabled. But you can access your camera, media files and other features that do not require
mobile data connectivity.
To activate airplane mode;
1. From Notifications or App menu, tap on Settings ( ).
2. Tap on Network & Internet( ) > Airplane Mode ( ).
14Bluetooth Turn ON
You can share the phone’s Internet connection via Bluetooth.
1. From Notifications or App menu, tap on Settings ( ).
2. Tap on Connected devices( > Connection preferences > Bluetooth( )
Bluetooth
Bluetooth is a short-range wireless communication technology used to communicate between the
devices over a distance of about 8 meters.You can perform the following tasks using Bluetooth
paired devices.
• Transfer media files and contacts between connected mobile devices using Bluetooth.
• Use Bluetooth connected headphones for playing media file.
Pairing A Bluetooth Device
To activate Bluetooth and pair your RS60 device with other
Bluetooth Devices:
1. From Notifications or App menu, tap on Settings ( ) > Connected devices ( ) > Connec-
tion preferences.
2. Tap and enable Bluetooth ( ). A list of accessible Bluetooth devices are displayed. Ensure
that Bluetooth is activated on the other device as well.
3. Tap on Pair new device ( ) to pair a new device. Available devices are listed.
4. Select the desired device from the list. It starts pairing with the selected device. A confirmation
message is displayed to pair the device. Select PAIR.
Device Name
1. From Notifications or App menu, tap on Settings ( ) > Connected devices ( )> Connection
preferences..
2. Tap and enable Bluetooth ( ).
3. Tap on Device name. Rename this device screen is displayed. You can change the name and
tap on Rename.
Connected Devices 11
15Cast
1. From Notifications or App menu, tap on Settings ( ) > Connected devices ( ) >
Connection preferences.
2. Tap on Cast ( ).
3. You can cast your screen from your Android™ device. Connect your Android device to the
same Wi-Fi network as your Chromecast or TV with Chromecast built-in. In the top left corner of
the app’s Home screen, tap on Menu Cast Screen > audio Cast Screen > audio.
4. Ensure that your Android device and Chromecast are connected to the same Wi-Fi network.
NFC
NFC (Near-Field Communication) is a set of communication protocols that enable two electronic
devices one of which is usually a portable device such as a smart phone, to establish communica-
tion by bringing them within 4 cm of each other.
1. From Notifications or App menu, tap on Settings ( ) > Connected devices ( ) > Connec-
tion preferences> NFC ( ).
2. Turn ON NFC to allows your device to scan various cards.
Printing
1. From Notifications or App menu, tap on Settings ( ) > Connected devices ( )> Connection
preferences > Printing ( ) .
2. Tap on Print > Default Print Service ( ). Turn On the Default Print Service.
3. Tap on Add services ( ). Google Play screen is displayed. You can sign in with your Google
credentials and add any desired service.
Files received via Bluetooth
Display the received file list information and can open it for viewing
Chromebook
Link devices so you can text from your computer,share your phone`s internet connection,and
simplify unlocking.*Use your chromebook to set up.
*Features vary by device
16APPS INFO
1. From Notifications or App menu, tap on Settings ( ) > Apps & notifications ( ).
2. Tap on App info.
The list of apps installed on the device are displayed.
1. Tap on All apps. You can view All apps, Installed apps and Disabled apps.
Tap on Options ( ) and the following options are displayed: Show system: System based apps
are displayed.
Show system: System based apps are hidden.
Reset app preferences: You can reset all the preferences set for the apps.

NOTIFICATIONS
1. From Notifications or App menu, tap on Settings ( ) > Apps & notifications ( ).
2. Tap on Notifications.
3. Tap on App notifications. Tap on the desired app and turn on the notification.
Tap on On the lock screen. There are two options: Show all notification content
Don’t show notification at all

Tap on Allow notification dots and turn it On to get a notification when you have an unread
notification.
Turn On Blink light to receive a LED notification light even when your device screen is off.
Turn On Flash call alert to receive an alert when there is an incoming call.
Turn On Flash notification alert to use camera flash light for missed events.
Tap on Default notification sound. Tap on the desired ringtone from the list. You can also add a
new ringtone using the option Add ringtone ( ).
APP PERMISSIONS
1. From Notifications or App menu, tap on Settings ( ) > Apps & notifications ( ).
2. Tap on App permissions. App permissions govern what your app is allowed to do and access.
ADVANCED
1. From Notifications or App menu, tap on Settings ( ) > Apps & notifications ( ).
Tap on Advanced and the following options are displayed: Default apps: The default apps are
listed.

12
APPS & NOTIFICATIONS
17 Wireless Emergency alerts: For more information, refer to “Wireless Emergency Alerts” on page
21.
Special app access: Tap on this option to view different settings.
ACCESSIBILITY
You can make websites and applications more accessible to people with disabilities when they
are using mobile phones and other devices.
From Notifications or App menu, tap on Settings ( ) > Accessibility ( ).
VOLUME SHORTCUT KEY
1. Tap on Volume key shortcut. Turn On to enable Shortcut service. You can select any of the
listed service to set a shortcut.
2. Enable Allow from lock screen to perform this functionality.

Glove Mode
From Notifications or App menu, tap on Settings ( ) > Accessibility ( )> Glove Mode.
SCREEN READERS
Under Screen readers, the following services are displayed:
Select to Speak: When Select to Speak is on, you can tap specific items on your screen to hear
them read aloud.
Talkback: When Talkback is enabled, it helps vision-impaired users interact with their devices. It
uses spoken word, vibration and other audible feedback to let you know what is on your screen.
Text-to-speech output: Preferred engine: By default, the preferred engine is Google
Text-to-speech engine. Tap on Settings ( ) and Google TTS options are displayed. Set the
options as per your requirement.
• Language: By default, Use system language option is selected. You can also select the
desired language.
• Speech rate: Tap on Speech rate to set the speech input rate to a comfortable speed.
• Pitch: Tap on Pitch to set the pitch rate.
• Tap on RESET to reset the settings.

13 ACCESSIBILITY
18DISPLAY
Under Display, the following options are displayed:
Magnification: You can set to ON to perform these gestures on the device screen:
Magnify with triple-tap
Magnify with button
Color correction: Turn On to make the color correction.
Correction mode: The following options are displayed: Deuteranomaly (red-green), Protanomaly
(red-green) and Trianomaly (blue-yellow)
Color inversion: If this is enabled, displayed colors are inverted and may affect the performance.
Large mouse pointer: Enable this option to set the large mouse pointer.
Remove animations: Enable this option to set the remove animations.
INTERACTION CONTROLS
Under Interaction controls, the following options are displayed:
Switch Access: Turn On to let people with motor impairments control phones using one or more
switches. Use switches to select items, scroll, enter text and more.
Click after pointer stops moving: Turn On to set the delay before click.
Power button ends call: Turn On to enable the call ending using the power button.
High contrast text: If this option is enabled, you can see the text changes into the contrast
colors.
Power button ends call: Turn on to enable the call ending using the power button.
Press Home wake up: Turn on to make the home screen wake up on press.
Auto-rotate screen: Turn on to set auto-rotate screen ON.
Touch & hold delay: You can set the delay time as Short, Medium and Long.
INTERACTION CONTROLS
Under Interaction controls, the following options are displayed:
Accessibility Menu: Turn On to provides a large on-screen menu to control your phone. You can
lock your phone, control volume and brightness, take screenshots, and more.
Switch Access: Turn On to let people with motor impairments control phones and tablets using
one or more switches. Use switches to select items, scroll, enter text and more.
Dwell timing: Turn On to set the delay before click.
Power button ends call: Turn On to enable the call ending using the power button.
Power button ends call: Turn on to enable the call ending using the power button.
19 Auto-rotate screen: Turn on to set auto-rotate screen ON.
Touch & hold delay: You can set the delay time as Short, Medium and Long.
Time to take action (Accessibility timeout): Choose how long to show messages that ask you to
take action, but are visible only temporarily. *Not all apps support this setting.
Default,
10 seconds,
30 seconds,
1 minute,
2 minutes
Vibration & haptic strength: Ring vibration ON/Off, Notification vibration ON/Off, Touch feedback
ON/Off.
AUDIO & ON-SCREEN TEXT
Under Audio & on-screen text, the following options are displayed:
Mono Audio: Enable Mono audio to combine the channels when playing audio.
Captions: When Captions is ON, you can set the following options under Standard options:
Text size
Caption style
Language
EXPERIMENTAL
Under Experimental, the following option is displayed:
High contrast text: If this option is enabled, you can see the text changes into the contrast
colors.

20Display
1. From Notifications or App menu, tap on Settings ( ) > Display ( ).
2. Set the following options to configure your phone’s display:
• Brightness level: Set the brightness of the phone display.
• Night Light :
• Schedule: You can schedule the night light on your device: None, Turns on at custom time and
Turns on from sunset to sunrise
– Stare time: Sunrise time
– End time:The sunset time
– Intensity: You can increase/decrease the light intensity as per your requirement.
• Adaptive Brightness: This optimizes the brightness level for available light.
• Wallpapers: Includes images that are pre-loaded with the phone.
• Dark theme : Turn On to display the black theme.
• Screen timeout: Set the sleep time so that the screen brightness is turned down after specified
time of phone inactivity. This setting also optimizes the battery power. The options are: Never,15
seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes and 30 minutes.
• Auto-rotate screen: Turn on to set auto-rotate screen ON.
• Font size: Set the font size of the text to be displayed on the screen.
• Display size: You can make the items on your screen smaller or larger. Some apps on your
screen might change position.
• Screen saver: You can set any of the applications as a screen saver.
• Lock screen display: Tap on lock screen display and turn On When to show > New notification.
The device screen is awake when you receive notifications.
Battery Settings
Battery
1. From Home screen or App menu, tap on Settings ( ) > Battery ( ).
• The graphic image of battery charging level is displayed.
• Last Full charge displays the time when the battery is fully charged.
• Screen usage since full charge displays the time duration the screen is used since the battery
the fully charged.
2. Under Power management the following options are displayed:
• Batter saver: Set the Battery saver to On by selecting the option given for Turn On.
Display Settings 14
15
21Sound
1. From Notifications or App menu, tap on Settings ( ) > Sound ( ).
Set the following options to set the Sound settings in your device:
2. Media volume : Adjust the volume as per your requirement.
3. Alarm volume : Adjust the alarm volume as per your requirement.
4. Notification volume : Adjust the volume for notification as per your requirement.
• Default Notification sound: Select the required Notification sound from the list and tap on OK to
set as the ringtone. You can also add a new ringtone using Add ringtone ( ) option.
• Default alarm sound: Select the required alarm sound from the list and tap on OK to set as the
ringtone. You can also add a new ringtone using Add ringtone ( ) option.
5. Other sounds and vibrations
Turn ON the following options to access the sound:
• Screen locking sounds
• Charging sounds and vibration
• Scanning sounds
• Touch sounds
• Touch vibration
Sound Settings 16
22Storage
1. From Notifications or App menu, tap on Settings ( ) > Storage ( ).
2. On Internal shared storage, the following options are displayed with memory used for each app:
• Photos and videos
• Music & audio
• Games
• Movie & TV apps
• Other apps
• Other
• System
Privacy Settings
Privacy
1. From Notifications or App menu, tap on Settings ( ) > Privacy ( ).
• Permission manager
• Show passwords
• Lock screen
• Autofill service from Google
• Advanced
• Google location history
• Activity controls
• Ads
Storage Settings 17
18
23Accessibility
You can make websites and applications more accessible to people with disabilities when they
are using mobile phones and other devices.
From Notifications or App menu, tap on Settings ( ) > Accessibility ( ).
Volume Key Shortcut
1. Tap on Volume key shortcut. Turn On to enable Shortcut service. You can select any of the
listed service to set a shortcut.
2. Enable Allow from lock screen to perform this functionality.
Google Settings
Google
1. From Notifications screen or App screen, tap on Settings ( ) > Google ( ).
2. The following services are displayed under Services:
• Account services
• Ads
• Autofill
• Backup
• Data & messaging
• Device connections
• On-device sharing
• App preview messages
• Parental controls
• Security
• Set up & restore
Accessibility Settings 19
20
24Language & Input
You can set the phone’s language to any of the languages displayed in the language list.All the
menu items and user feedback messages will be displayed in the set language.
1. From Notifications screen or App screen, tap on Settings ( ) > System ( ) > Languages
& input ( ).
2. Tap on Languages and select any desired language from the list as your preferred language.
• Default language: English is set as the default language. This can be changed by you if you
prefer to have a different default language.
• Add a language: you can select any languages from Suggested languages list or All languages
list.
• Search: Tap on Search icon ( ) to search a language.
3. The following options are displayed under KEYBOARD:
• Virtual keyboard:
– Gboard: You can use Google keyboard which is multilingual typing keyboard.
– Google voice typing: You can use Google voice typing for entering the text instead of using the
keyboard.
– Manage keyboards: From this menu, you are able to enable and manage different keyboards
available to you.
• Physical keyboard:
– Show virtual keyboard: Enable this option to keep it on screen while physical keyboard is
active.
– Keyboard shortcuts helper: Displays available shortcuts.

System Settings
21
25System Updates
1. From Notifications or App screen, tap on Settings ( ) > System Updates ( ).
2. Tap on Check for update to check if your device requires any new system updates. If there is an
update, the system will update your device. If your device is up to date, it will show Your system is
up to date.
261. Barcode scanner feature is integrated in your device. It is an enterprise class scan engine
capable of fast and reliable scanning that can also read tags with ease and perform in low-light
conditions.
2. Sonim Scan app works with your device to allow you to set settings and adjust configurations for
barcode scanning. In conjunction with the barcode scanner module, Sonim Scan will capture
barcode data and then interpret that data and transmit that information in one of two ways, either
directly into a text field (Data insertion) or as a Broadcast to a third-party app that would need to
be listening for that Broadcast.
3. From Home screen or App menu, tap on Sonim Scan ( ), you will see the Sonim Scan main
menu.
• Turn Off Power allow you turn OFF or turn ON Scanner module power. Scanner power is ON by
default.
• You can tap on Scan Now to start scanning when Scanner power is ON.
• Tap on Settings, you can set and adjust configurations for barcode scanning.
• FAQ lists many questions and answers that may help you understand more about Sonim Scan.
Sonim Scan
22
27You can use the phonebook to maintain phone numbers of your contacts. This feature enables
you to add, dial phone numbers and send SMS and MMS messages. To access the contacts,
from Home screen, select Contacts ( ). The contacts saved in the phonebook are displayed.
ADDING A CONTACT
After inserting the SIM, when you switch ON the device for the first time and there are no contacts
added in the device or SIM.
CREATING A NEW CONTACT
1. From App menu, tap on Contacts ( ).
2. To add a new contact, tap on Phone ( ) on the home screen, tap on Dial pad ( ) and dial
the required number.
3. Tap on Create new contact ( ). Enter all the details and tap on Save. The contact is added to
the phonebook.
VIEWING CONTACT DETAILS
1. From Home screen or App screen, tap on Contacts ( ).
2. Tap on the required contact to view the contact details.
EDITING THE CONTACT DETAILS
1. From Home screen or App screen, tap on Contacts ( ).
2. Scroll to the required contact and tap on the contact to view details.
3. Tap on the Edit ( ) which is present on top right corner
4. Edit the required details. Tap on Save to save the details.
Managing Contacts
23
28SENDING A MESSAGE FROM CONTACTS
You can send SMS and MMS messages to the contacts.
1. From Home screen or App menu, tap on Contacts ( ).
2. Scroll to the required contact and tap and open it.
4. The Messages screen is displayed. Enter the message and tap on Add contact ( ). Tap on
the required contact.
5. Tap on Attach ( ) to attach any of the following:
• Subject
• Pictures
• Capture picture
• Videos
• Capture video
• Audio
• Record audio
• Slideshow
• Import Template
6. Tap on SMS ( ) to send the message.
MENU OPTIONS
On the Contacts screen, tap on Menu ( ) to view the menu options. Following are the menu
options:
Settings
Tap on settings ( ) to settings any of the following:
1. Your info
Tap on Your info to set up your profile. Enter the details and tap on Save.
2. Accounts .
Tap on Users & accounts. For more information, refer to “Users and accounts” on page 30.
3. Default account for new contacts
Tap on Default account for new contacts. Phone will be the default account.
4. Contacts to display
Tap on Contacts to display. You can display the contacts in one of the following ways:
• All contacts: When this option is selected, all the contacts are displayed.
• Customize: You can customize the contacts to be displayed.
5. Sort by
Tap on Sort by. You can sort the contacts by their First name or Last name.
296. Name format
Tap on Name format. You can select any one of the following options to display contact name:
• First name first
• Last name first.
7. Phonetic name
Tap on Phonetic name. You have following options:
• Always show
• Hide if empty
8. Import
Tap on Import. You have following two options:
• .vcf file: Tap on .vcf file to save imported contact to phone or another SIM.
9. Export
Tap in Export. The following options are displayed:
• Export to .vcf file: The contacts are saved as contacts.vcf. Tap on Save and a toast message is
displayed; Contacts will be exported shortly.
• Share all contacts: Tap on the option and a toast message is displayed; Finished exporting
contacts, click the notification to share contacts. The contacts will be exported shortly.
10. Blockednumbers
Tap on Blocked numbers. You will not receive any calls or text messages from the blocked
numbers.
11. About Contacts
Tap on About Contacts. The following options are displayed:
• Build version
• Open source licenses
• Privacy policy
• Terms of service
ACCOUNTS
You have two options under Accounts.
1. Phone: The contacts saved in the phone are displayed.
2. SIM: The contacts saved in the SIM are displayed.
30• Tap on Add a Number. Enter the number to be blocked and tap on Block. The number is blocked
and you do not receive any call or message from that number.
11. Tap on About Contacts. The following options are displayed:
• Build version
• Open source licenses
• Privacy policy
• Terms of service
SEARCHING A CONTACT
1. From Home screen or App screen, tap on Contacts ( ).
2. Tap Search ( ) and enter the first few letters/numbers of the contact name/phone number to
be searched. All the contacts containing the searched text are displayed.
SHARING A CONTACT
1. From Home screen or App screen, tap on Contacts ( ).
2. Long tap on the desired contact to select it.
3. Tap on Share ( ) and you can use any of the following modes to share the contact:
• Bluetooth
DELETING A CONTACT
1. From Home screen or App screen, tap on Contacts ( ).
2. Tap on Delete ( ). All the contacts are displayed.
3. Check the box next to the contact to be deleted.
4. Select Options ( ) > Delete.
5. Tap on OK. A confirmation message is displayed; These contacts will be deleted. Tap on OK.
The contact is deleted.
31MAKING A CALL
From Home screen or Apps Menu, tap on the Phone ( )
The Phone screen with Call history, Dial pad ( ), and Call Options ( ) are displayed.
To dial a number use one of the following options:
• Call history: Tap on the call History icon ( ). Tap on the Phone icon ( ) beside the contact
or tap on the contact and tap on the number.
• Dial pad: Tap on the dial pad. The numeric touch keypad is displayed. Enter the phone number
and tap the phone icon to make a call.
To dial an international number, prefix the phone number with the respective country code.
• Frequently called contacts/numbers: Tap the specific contact/number from the frequently
called/Received/Missed numbers list to make a call.
DIALING A NUMBER VIA CONTACT
1. From Home screen or App screen, tap on Contacts ( ).
2. Scroll to the contact and tap on the contact. The contact details are displayed.
3. Tap on the phone icon ( ) and a call is initiated.
ADDING CONTACT FROM HOME SCREEN
1. From Home screen or App screen, tap on the Phone ( ). Enter the required number to be
dialed.
2. Select Add to contact ( )
3. Select Create new contact ( ).
4. In the Add new contact screen, add the name and other details for the contact.
5. Tap on Tick mark ( ) to save the contact details.
VIEWING CALL HISTORY
1. From Home screen or Apps menu, select Phone ( ).
2. Tap on Call History.
3. Tap on Option ( ) > Call History.
4. Tap on All to view all the incoming, outgoing, and missed calls.
5. Tap on Missed to view only the missed calls.
Managing Call Settings
24
32CALL HISTORY SCREEN
1. From Home screen or App screen, tap on Phone ( ).
2. Tap on Options ( ) > Call History .
3. The following options are displayed:
• ALL tab: The call log for today, yesterday and older period of time are displayed. The call log
includes missed calls, received calls, and dialed calls.
• MISSED tab: The missed call log for today, Yesterday, and older period of time are displayed.
• Tap on Options ( ).
The following options are displayed:
• Clear call history: Tap on Clear call history and select the required call log from the list. Selected
call logs are marked with tick mark ( ). Tap on CLEAR. A confirmation message is displayed.
Tap on OK to clear the call log.

DELETING CALL HISTORY
1. From Home screen or App screen, tap on Phone( ).
2. Tap on Call History.
3. Tap on Options ( ) > Call History > again tap on Options ( ) > Clear call history to
delete the call history.
4. Tap and select the call log to be deleted and tap on CLEAR.
5. A confirmation message is displayed to delete the selected call log. Tap on OK to delete the
call log. The selected call log is deleted.
MANAGING CALL SETTINGS
You can change the incoming call ring tone, set phone to vibrate while ringing and also activate
voicemail, and other settings in Call settings screen.
Your phone uses sounds and vibrations to communicate with you, including ringtones, notifica-
tions, alarms, and navigation feedback. You can customize any of these sounds, as well as
controlling their volume and the volume for music, videos, games, and other media.
The following settings are displayed:
33DISPLAY OPTIONS
1. From Home screen or App screen, tap on Phone ( ).
2. Tap on Options ( ) > Settings > Display options.
• Sort by: You can sort the contacts by First name or Last name.
• Name format: You have two options to display the contact name:
• First name first
• Last name first
SOUNDS AND VIBRATION
• Phone Ringtone: To change the phone ringtone,
1. From the Home screen Apps Menu, tap on Settings ( ).
2. Tap on Device settings > Sound ( ) > Phone ringtone.
3. Select the required ringtone from the list and tap on OK.
The ringtone is changed.
OR
1. From Home screen or Apps menu, select Phone ( ).
2. Tap on Options ( ) > Settings > Sounds and vibration.
3. Tap on Phone ringtone.
4. Select the required ringtone from the list and tap on OK.
The ringtone is changed.
• Also vibrate for calls: If this option is checked, device is set to vibrate mode when a call is
received.
• Dialpad tones: Check this option to set the tone for the dialpad when numbers are dialed.
QUICK RESPONSES
The quick responses are the messages that can be used to reject the call with a message.
1. From Home screen or Apps menu, select Phone ( ).
2. Tap on Options ( ) > Settings > Quick responses.
34The list of quick responses are displayed.
3. Tap on the required quick responses from the list to edit that particular message and tap on OK
to save the message to the list.
4. While an incoming call arrives, touch the message icon to open a list of quick responses or the
option to write your own message. Touch one of the messages to send it to the caller immediately
and the call gets disconnected.
CALLS
Calling accounts
1. From Home screen or Apps menu, select Phone ( ).
2. From Call History screen, tap on Options ( ) > Settings > Calling accounts.
SIP settings
SIP accounts:
To add a SIP account and configure your incoming and outgoing preferences:
1. Tap on Calling accounts > SIP settings > SIP accounts.
2. On SIP accounts screen, tap on Add SIP account ( ) to configure a new SIP account.
3. Enter the following details and tap on Save to save the account:
• Username: Username to login to SIP account.
• Password: Password to login to SIP account.
• Server: SIP server details.
• Optional Settings: Select to view/modify or hide optional details such as Authentication
username, Display name, Outbound proxy address, Port number, Transport type and
Send keep-alive options.
Use SIP Calling:
A dialog is open with the following options:
• For all calls: If this option is selected and when the phone is connected to Wi-Fi network or
mobile Internet, each dialed call becomes an Internet call.
• Only for SIP calls: If this option is selected, only SIP call can be dialed
Receiving Incoming Calls
Enable Receive incoming calls to answer incoming Internet calls.
This might reduce your phone’s battery life.
35Fixed dialing numbers
1. From Home screen or Apps menu, select Phone ( ).
2. From Call History screen, tap on Options ( ) >Settings > Calls > Fixed Dialing Numbers.
The following options are displayed:
• Enable FDN: Fixed dialing numbers are enabled.
• Change PIN2: Change PIN for FDN access.
• FDN list: You can manage phone number list.
Call forwarding
You can forward your incoming calls to a number in the contacts or a new number, provided your
network operator supports this service.
• Always forward: Forward all incoming calls to a pre-designated number.
• When busy: Forward calls when your phone is busy.
• When unanswered: Forward calls when you do not answer incoming calls.
• When unreachable: Forward calls when your phone is switched off or is out of coverage area.
Additional settings
• Caller ID: When SIM card is inserted, this option is enabled. This feature is used to display caller
details (MSISDN or contact name) to the user. If there is no network connection, the number is
displayed a private number.
• Call waiting: When call waiting is enabled and the phone is in conversation, the incoming
number is displayed when you receive a call. To activate call waiting in the Call settings screen,
enable Call waiting.
Call barring
• Outgoing call barring: The following outgoing calls are barred:
• Outgoing call,
• International call
• International roaming call
• Incoming call barring: The following incoming calls are barred:
• All
• Roaming
• Cancel all call barring: Input the password to cancel the call barring.
• Change password: Change the password.
36BLOCKED NUMBERS
You will not receive calls or messages from blocked numbers. Tap on Add a Number to block
calls and text from that particular number. Enter a number and tap on Block.
VOICEMAIL
Notifications: Turn On Voicemails.
1.Pop on screen
When device is unlocked,show notifications as a banner across the top of the screen
2.Advanced
• Sound: Default notification sound is selected. You can select any other sound from the list.
• Vibrate: Turn On to get the vibration when a voicemail is received.
• Show notification dot: Turn On the toggle button to show a notification dot when a voicemail is
received.
• Override Do Not Disturb: Turn On this option when notifications continue to interrupt when Do
Not Disturb is set to Priority only.
ASSISTED DIALING
• Assisted dialing: Turn On to predict and add a country code when you call while traveling
abroad.
• Home country:
• Default home country: By default, Automatically detected options is selected.
CALLER ID & SPAM
• Caller ID &spam: Turn On this option to enable Filter spam calls option.
• Filter spam calls: Turn On this option to prevent suspected spam calls from disturbing you.
NEARBY PLACES
• Nearby places: Turn On this option to enable Personalized search results.
• Personalized search results: Enable this option to improve your search results by including items
from your search history.
• Google Account: You can sign in with your Google account.
3738
Use responsibly. Read all instructions and safety information before use to avoid injury. The
maximum operating ambient temperature of the equipment is 55°C.
1.Battery Safety
Battery works at ambient temperatures ranging from-20°C to 55°C.
CAUTION: Risk of explosion if battery is replaced incorrectly. Replace with the same or equivalent
type of battery as recommended by the manufacturer. Dispose used batteries according to battery
manufacturer’s instructions.
Note: Charging temperature specifications is from 0°Cto 45°C.
2.Charger Safety
Please place the device in an environment that has a normal room temperature with good ventilation
when charging. It is recommended to charge the device in an environment with an ambient
temperature that ranges from 5°C~40°C
3.Wi-Fi Safety
Turn Wi-Fi off in areas where Wi-Fi use is prohibited or when it may cause interference or danger,
such as in airplanes while flying.
4.Avoid Damage To Your Hearing
Exposure to loud volumes from earphones and headphones over prolonged periods can cause
hearing loss.
This device is restricted to indoor use where operated in the European Community using
frequency in 5150MHz ~ 5350MHz to reduce the potential for interference. Restriction in
BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU , HU , MT , NL , AT,
PL, PT, RO, SI, SK, FI, SE, UK Band 5150-5350MHz is restricted to indoor use. (European/Canada/Japan)
Water & Dust proof: IP67
Product Safety Warnings 25HEARING AID COMPATIBILITY (HAC) REGULATIONS FOR MOBILE PHONES
In 2003, the FCC adopted rules to make digital wireless telephones compatible with hearing aids
and cochlear implants. Although analog wireless phones do not usually cause interference with
hearing aids or cochlear implants,digital wireless phones sometimes do because of electromag-
netic energy emitted by the phone’s antenna,back light, or other components. Your phone is
compliant with FCC HAC regulations (ANSI C63.19- 2011). While some wireless phones are used
near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more immune than others to this
interference noise and phones also vary in the amount of interference they generate. The wireless
telephone industry has developed a rating system for wireless phones to assist hearing device
users in finding phones that may be compatible with their hearing devices. Not all phones have
been rated. Phones that are rated have the rating on their box or a label located on the box. The
ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable to interference, you may not be able to use
a rated phone successfully. Trying out the phone with your hearing device is the best
way to evaluate it for your personal needs.
This phone has been tested and rated for use with hearing aids for some of the wireless
technologies that it uses. However, there may be some newer wireless technologies used in this
phone that have not been tested yet for use with hearing aids. It is important to try the different
features of this phone thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service provider or the
manufacturer of this phone for information on hearing aid compatibility. If you have questions
about return or exchange policies, consult your service provider or phone retailer.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less
interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/
higher of the two ratings. (Note that not all hearing devices have telecoils in them.)
39Your phone meets the M4/T4 level rating. Hearing devices may also be rated. Your hearing
device manufacturer or hearing health professional may help you find this rating. For more
information about FCC Hearing Aid Compatibility, please go to http://www.fcc.gov/cgb/dro.
This phone has been tested and rated for use with hearing aids for some of the wireless
technologies that it uses. However, there may be some newer wireless technologies used in this
phone that have not been tested yet for use with hearing aids. It is important to try the different
features of this phone thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service provider or the
manufacturer of this phone for information on hearing aid compatibility. If you have questions
about return or exchange policies, consult your service provider or phone retailer.
40DECLARATION OF CONFORMITY
41NOTICE
1. Some special places, such as airports, hospitals, gas stations and other places, do not allow the
use of electronic equipment. Please comply with the rules and do not use this product in these
places.
2. For your safety and the safety of others, please do not use this product while driving a vehicle.
3. In order to avoid potential safety problems, do not put this product near the vehicle`s airbag.
4. For your safety, please do not use this product during thunderstorms.
5. Although this product is waterproof, do not leave this product for long periods of time in areas with
water or moisture.
6. This product has an operating temperature range of -20°C~+55°C and a storage temperature
range of -40°C~+70°C. Extreme temperatures can affect the device`s performance and service life.
7. Please use an original rechargeable lithium battery. Low-quality batteries will affect the
performance and service life of the device, and may even have the danger of explosion.
8. Although the product has been tested to withstand harsh operating environments, do not use the
product in an improper manner.
9. Please do not disassemble this product. In case of failure, please send to our authorized service
centres to proceed with repairs.
10. After the device has reached the end of its service life, please discard in a proper way to avoid
environmental pollution.
11. When replacing the battery or during the use of an external power supply, shut down the device
completely before removing the battery or disconnecting the external power supply to prevent
damage.
12. This product is a Class B product, which may cause radio interference. The user may be
required to take necessary preventive measures.
42NOTICE:
The SAR limit of Europe is 4.0 W/kg. Device types RS60 has also been tested against this SAR
limit.The highest SAR value reported under this standard during product certification for use on the
body is 3.358W/kg This device was tested for typical body – worn operations with the back of the
handset kept 0 cm from the body. To maintain compliance with RF exposure requirements, use
accessories that maintain a 0 cm separation distance between the user`s body and the back of the
handset. The use of belt clips, holsters and similar accessories should not contain metallic compo-
nents in its assembly. The use of accessories that do not satisfy these requirements may not comply
with RF exposure requirements, and should be avoided.
After the laboratory measurements the Max. SAR values for this device is:
Limb: 3.358 W/kg, when the device used at 0cm form your body. The SAR limit of France is 4.0 W/kg.
Limb: 1.476 W/kg, when the device used at 5cm form your body. The SAR limit of Europe is 2.0 W/kg.
Caution Risk Of Explosion If Battery Is Replaced By An Incorrect Type. Dispose Of Used Batteries
According To The Instructions.
Hereby, [Sonim Technologies Inc.] declares that the radio equipment type [RS60] is in compliance
with Directive 2014 / 53 /EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.sonimtech.com
This device complies with Part 22 & 24 and Part 27 of the FCC Rules.
43SAR information
The SAR limit of FCC and ISED is 1.6 W/kg averaged over one gram of tissue. Device types RS60
( FCC ID:WYPRS60 and IC: 8090A-RS60 ) has also been tested against this SAR limit. The highest
SAR value reported under this standard during product certification for use on the body is
1.504 W/kg. This device was tested for typical body -worn operations with the back of the handset
kept 0 cm from the body. To maintain compliance with FCC and ISED RF exposure requirements,
use accessories that maintain a 0 cm separation distance between the user`s body and the back of
the handset. The use of belt clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy these requirements may not
comply with FCC and ISED RF exposure requirements, and should be avoided.
44Battery Instructions
1. This product uses a rechargeable lithium battery as a power source. When the power is low,
please charge the battery. To maintain battery life, it is recommended to deplete the battery`s power
before charging.
2. When the battery charger is not in use, please remove it from the power supply. Do not connect the
charger to the battery for more than one week. Excessive charging will shorten the battery life.
3. Temperature affects the battery charging limit. Therefore, the battery may need to be cooled or
warmed up before charging.
4. Please use the battery for its original intended purpose to prevent short-circuiting the battery. A
short circuit will occur when a conductive material connects the battery’s positive and negative
terminals.
5. Do not use a battery that is damaged.
6. Placing the battery in extremely cold or hot places will lead to shortened battery life. Exposing the
battery to extreme temperatures may cause the phone to malfunction, even if the battery is fully
charged.
7. Do not put the battery in a fire. Please discard the battery in a proper manner or take the battery to
a battery recycling station. Please dispose waste batteries in accordance with local laws and
regulations.
Google, Android, Google Play, YouTube and other marks are trademarks of Google LLC.
Importer: Sonim Technologies, Corporate Headquarters
6836 Bee Cave Road, Building 1, Suite 279, Austin, TX 78746
Manufacturer: Sonim Technologies, Corporate Headquarters
6836 Bee Cave Road, Building 1, Suite 279, Austin, TX 78746
45NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d`Industrie Canada applicables aux appareils radio
exempts de licence. L`exploitation est autorisée aux deux conditions suivantes : (1) l`appareil ne doit
pas produire de brouillage, et (2) l`utilisateur de l`appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d`en compromettre le fonctionnement.
NOTICE:
Changes or modifications made to this equipment not expressly approved by Sonim Technologies,
Corporate Headquarters may void the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
This Class [B] digital apparatus complies with Canadian ICES -003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB – 003 du Canada.
RF mode and power tune-up refer to appendix A
46
Antenna Type: FPCAntennaAppendix A for EU
Normal Mode RF Power Range (GSM)
Mode Range(dBm)
GSM900 33.00-34.00
GPRS900(1 Slot) 29.50-30.50
GPRS900(2 Slots) 29.50-30.50
GPRS900(3 Slots) 29.50-30.50
GPRS900(4 Slots) 29.50-30.50
EGPRS (8PSK, 1-Slot)
22.50-23.50
EGPRS (8PSK, 2-Slots)
22.50-23.50
EGPRS (8PSK, 3-Slots)
22.50-23.50
EGPRS (8PSK, 4-Slots) 22.50-23.50
GSM1800 29.50-31.00
GPRS1800(1 Slot) 27.00-28.50
GPRS1800(2 Slots) 27.00-28.50
GPRS1800(3 Slots) 27.00-28.50
GPRS1800(4 Slots) 27.00-28.50
EGPRS (8PSK, 1-Slot) 21.50-23.00
EGPRS (8PSK, 2-Slots) 21.50-23.00
EGPRS (8PSK, 3-Slots) 21.50-23.00
EGPRS (8PSK, 4-Slots) 21.50-23.00
Normal Mode RF Power Range ( WCDMA)
Mode Range(dBm)
WCDMA Band 1 RMC 23.00-24.50
WCDMA Band 1 HSDPA 22.00-23.50
WCDMA Band 1 HSUPA 20.50-23.50
WCDMA Band 8 RMC 23.80-24.50
WCDMA Band 8 HSDPA 22.00-24.50
WCDMA Band 8 HSUPA 20.50-23.50
Normal Mode RF Power Range (LTE)
Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 1 20 MHz
1
QPSK
23.00-24.50
50 22.00-23.50 Appendix A for EU
100 22.00-23.50
1
16QAM
22.50-24.00
50 21.00-22.50
100 21.00-22.50
15 MHz
1
QPSK
23.00-24.50
36 22.00-23.50
75 22.00-23.50
1
16QAM
22.00-24.00
36 21.50-22.50
75 21.00-22.50
10 MHz
1
QPSK
23.00-24.50
25 22.00-23.50
50 22.00-23.50
1
16QAM
22.00-24.00
25 21.00-22.50
50 21.00-22.50
5 MHz
1
QPSK
23.00-24.50
12 22.00-23.50
25 22.00-23.50
1
16QAM
22.50-23.50
12 21.50-22.50
25 21.50-22.50

Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 3
20 MHz
1
QPSK
22.50-23.80
50 21.50-22.50
100 21.50-22.50
1
16QAM
22.00-23.50
50 20.50-21.50
100 20.50-21.50
15 MHz
1
QPSK
22.50-23.80
36 21.50-22.80
75 21.50-22.50
1 16QAM 21.80-23.00 Appendix A for EU
36 20.50-21.50
75 20.50-21.50
10 MHz
1
QPSK
22.30-23.50
25 21.50-22.50
50 21.50-22.50
1
16QAM
21.50-23.00
25 20.50-21.50
50 20.50-21.50
5 MHz
1
QPSK
22.50-23.50
12 21.50-22.50
25 21.50-22.50
1
16QAM
21.50-23.00
12 20.50-21.50
25 20.50-21.50
3 MHz
1
QPSK
22.50-23.50
8 21.50-22.50
15 22.50-23.50
1
16QAM
21.50-23.00
8 20.50-21.80
15 20.50-21.50
1.4 MHz
1
QPSK
22.50-23.50
3 22.50-23.50
6 21.50-22.50
1
16QAM
21.50-23.00
3 21.50-22.80
6 20.50-21.50
Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 7 20 MHz
1
QPSK
22.00-23.50
50 21.50-22.50
100 21.50-22.50
1
16QAM
21.50-22.80
50 20.50-21.50
100 20.50-21.50 Appendix A for EU
15 MHz
1
QPSK
22.00-23.50
36 21.50-22.50
75 21.50-22.50
1
16QAM
21.00-22.50
36 20.50-21.50
75 20.50-21.50
10 MHz
1
QPSK
22.00-23.50
25 21.50-22.50
50 21.50-22.50
1
16QAM
21.00-23.00
25 20.50-21.50
50 20.50-21.50
5 MHz
1
QPSK
22.50-23.50
12 21.50-22.50
25 21.50-22.50
1
16QAM
21.50-22.50
12 20.50-21.50
25 20.50-21.50

Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 8
10 MHz
1
QPSK
23.00-24.50
25 22.50-23.50
50 22.50-23.50
1
16QAM
22.00-24.00
25 21.50-22.50
50 21.50-22.50
5 MHz
1
QPSK
23.00-24.50
12 22.50-23.50
25 22.50-23.50
1
16QAM
22.50-23.50
12 21.50-22.50
25 21.50-22.50
3 MHz
1
QPSK
23.00-24.50
8 22.50-23.50 Appendix A for EU
15 22.50-23.50
1
16QAM
22.50-23.80
8 21.50-22.80
15 21.50-22.50
1.4 MHz
1
QPSK
23.00-24.50
3 23.00-24.50
6 22.30-23.50
1
16QAM
22.00-23.50
3 22.00-23.50
6 21.50-22.50

Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 20
20 MHz
1
QPSK
23.50-24.80
50 22.50-23.80
100 22.50-23.80
1
16QAM
22.60-24.00
50 21.50-23.00
100 21.50-23.00
15 MHz
1
QPSK
23.00-24.80
36 22.50-24.00
75 22.50-24.00
1
16QAM
22.30-24.00
36 21.50-23.00
75 21.50-23.00
10 MHz
1
QPSK
23.00-24.80
25 22.30-23.80
50 22.30-23.50
1
16QAM
22.00-24.00
25 21.50-23.00
50 21.50-22.50
5 MHz
1
QPSK
23.30-24.50
12 22.50-24.00
25 22.50-24.00
1 16QAM 22.50-24.00 Appendix A for EU
12 21.50-23.00
25 21.50-23.00

Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 28A
20 MHz
1
QPSK
23.00-24.50
50 22.00-23.50
100 22.00-23.50
1
16QAM
22.50-24.00
50 21.50-22.50
100 21.50-22.50
15 MHz
1
QPSK
23.00-24.50
36 22.50-23.50
75 22.50-23.50
1
16QAM
22.00-24.00
36 21.50-22.50
75 21.50-22.50
10 MHz
1
QPSK
22.80-24.20
25 22.50-23.50
50 22.50-23.50
1
16QAM
22.00-23.50
25 21.50-22.50
50 21.00-22.00
5 MHz
1
QPSK
23.00-24.50
12 22.50-23.50
25 22.50-23.50
1
16QAM
22.30-23.80
12 21.50-22.50
25 21.50-22.50
3 MHz
1
QPSK
23.00-24.50
8 22.50-23.50
15 22.50-23.50
1
16QAM
22.00-23.50
8 21.50-22.50
15 21.50-22.50 Appendix A for EU
Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 38
20 MHz
1
QPSK
22.50-23.80
50 21.50-23.00
100 21.50-23.00
1
16QAM
22.00-23.50
50 20.50-22.00
100 20.50-22.00
15 MHz
1
QPSK
22.50-24.00
36 21.50-23.00
75 21.50-23.00
1
16QAM
22.00-23.50
36 20.50-22.00
75 20.50-22.00
10 MHz
1
QPSK
22.80-24.00
25 21.50-23.00
50 21.50-23.00
1
16QAM
22.00-24.00
25 20.50-22.00
50 20.50-22.00
5 MHz
1
QPSK
23.00-24.00
12 21.80-23.00
25 21.50-23.00
1
16QAM
22.00-23.50
12 20.80-22.00
25 20.80-22.00
Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 40 20 MHz
1
QPSK
22.00-23.80
50 21.50-22.50
100 21.50-22.50
1
16QAM
21.80-23.50
50 20.50-21.50
100 20.50-21.50 Appendix A for EU
15 MHz
1
QPSK
22.50-23.80
36 21.50-22.80
75 21.50-22.80
1
16QAM
21.50-23.00
36 20.50-21.80
75 20.50-21.80
10 MHz
1
QPSK
22.50-23.80
25 21.50-22.80
50 21.50-22.80
1
16QAM
21.50-23.00
25 20.50-21.80
50 20.50-21.80
5 MHz
1
QPSK
22.50-23.80
12 21.50-22.80
25 21.50-22.80
1
16QAM
21.50-23.00
12 20.50-21.80
25 20.50-21.80
Normal Mode RF Power Range (WLAN/Bluetooth)
Band (GHz) Mode Range(dBm)
WIFI 2.4G
(2.4~2.4835)
802.11b 12.00-14.50
802.11g 11.50-13.50
802.11n(HT20) 10.30-12.50
802.11n(HT40) 9.00-11.00
Band (GHz) Mode Range(dBm)
WIFI 5.2 G
(5.15~5.25)
802.11a 12.00-13.00
802.11n(HT20) 10.50-12.00
802.11ac(VHT20) 13.00-14.50
802.11n(HT40) 9.50-11.00
802.11ac(VHT40) 9.50-11.00
802.11ac(VHT80) 7.50-8.50
WIFI 5.8G
(5.725~5.850)
802.11a 9.00-10.50
802.11n(HT20) 8.50-9.50
802.11ac(VHT20) 9.50-10.50
802.11n(HT40) 8.50-9.50 Appendix A for EU
802.11ac(VHT40) 9.50-10.50
802.11ac(VHT80) 8.50-9.50

Band (GHz) Mode Range(dBm)
Bluetooth
(2.4~2.4835)
GFSK 2.00-3.50
π / 4-DQPSK 0.00-2.00
8-DPSK 0.00-2.00
BLE (-2.00 )- (-0.50 )
Appendix A for US
Normal Mode RF Power Range (GSM, WCDMA)
Mode Range(dBm)
GSM850 33.00-34.20
GPRS850(1 Slot) 30.00-31.00
GPRS850(2 Slots) 30.00-31.00
GPRS850(3 Slots) 30.00-30.80
GPRS850(4 Slots) 30.00-30.80
EGPRS (8PSK, 1-Slot)
23.00-24.00
EGPRS (8PSK, 2-Slots)
23.00-24.00
EGPRS (8PSK, 3-Slots)
23.00-24.00
EGPRS (8PSK, 4-Slots) 23.00-24.00
GSM1900 29.50-30.50
GPRS1900(1 Slot) 26.00-27.00
GPRS1900(2 Slots) 26.00-27.00
GPRS1900(3 Slots) 26.00-27.00
GPRS1900(4 Slots) 26.00-27.00
EGPRS (8PSK, 1-Slot) 20.50-21.50
EGPRS (8PSK, 2-Slots) 20.50-22.00
EGPRS (8PSK, 3-Slots) 20.50-22.00
EGPRS (8PSK, 4-Slots) 20.50-22.00
WCDMA Band 2 RMC 22.50-23.60
WCDMA Band 2 HSDPA 21.00-22.80
WCDMA Band 2 HSUPA 19.00-22.50
WCDMA Band 4 RMC 22.50-23.50
WCDMA Band 4 HSDPA 21.00-22.50
WCDMA Band 4 HSUPA 19.50-22.50
WCDMA Band 5 RMC 23.50-24.50
WCDMA Band 5 HSDPA 22.00-23.50
WCDMA Band 5 HSUPA 20.50-23.50

Appendix A for US
Normal Mode RF Power Range (LTE)
Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 2
20 MHz
1
QPSK
22.50-23.80
50 22.00-23.00
100 22.00-23.00
1
16QAM
22.00-23.00
50 21.00-22.00
100 21.00-22.00
15 MHz
1
QPSK
22.50-23.80
36 21.50-23.80
75 21.50-23.00
1
16QAM
21.50-23.30
36 20.50-21.80
75 20.50-21.50
10 MHz
1
QPSK
22.50-23.80
25 21.50-23.00
50 21.50-23.00
1
16QAM
21.50-23.50
25 20.50-22.00
50 20.50-22.00
5 MHz
1
QPSK
22.50-23.80
12 21.50-23.00
25 21.50-23.00
1
16QAM
21.50-23.50
12 20.50-22.00
25 20.50-22.00
3 MHz
1
QPSK
22.50-23.70
8 21.50-23.00
15 21.50-23.00
1
16QAM
21.50-23.50
8 20.80-22.00
15 20.80-22.00
1.4 MHz 1 QPSK 22.50-23.50 Appendix A for US
3 22.50-23.50
6 21.50-22.50
1
16QAM
21.50-23.00
3 21.50-23.00
6 21.00-22.00

Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 4
20 MHz
1
QPSK
22.00-23.50
50 21.00-22.00
100 21.00-22.00
1
16QAM
21.50-22.50
50 20.00-21.00
100 20.00-21.00
15 MHz
1
QPSK
22.00-23.50
36 21.00-22.00
75 21.00-22.00
1
16QAM
21.00-22.80
36 20.00-21.00
75 20.00-21.00
10 MHz
1
QPSK
22.00-23.50
25 21.00-22.50
50 21.00-22.50
1
16QAM
21.00-22.80
25 20.00-21.30
50 20.30-21.30
5 MHz
1
QPSK
22.00-23.50
12 21.00-22.30
25 21.00-22.30
1
16QAM
21.00-22.50
12 20.50-21.50
25 20.50-21.50
3 MHz
1
QPSK
22.00-23.50
8 21.00-22.30 Appendix A for US
15 21.00-22.30
1
16QAM
21.00-22.50
8 20.50-21.50
15 20.50-21.30
1.4 MHz
1
QPSK
22.00-23.30
3 22.00-23.30
6 21.50-22.50
1
16QAM
21.50-22.50
3 21.50-22.50
6 20.30-22.50

Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 5
10 MHz
1
QPSK
23.50-24.50
25 22.50-23.50
50 22.50-23.50
1
16QAM
22.50-24.00
25 21.50-22.50
50 21.50-22.50
5 MHz
1
QPSK
23.50-24.50
12 22.50-23.50
25 22.50-23.50
1
16QAM
22.50-24.00
12 21.50-22.50
25 21.50-22.50
3 MHz
1
QPSK
23.50-24.50
8 22.50-23.50
15 22.50-23.50
1
16QAM
22.50-23.50
8 21.50-22.50
15 21.50-22.50
1.4 MHz
1
QPSK
23.50-24.50
3 23.30-24.50
6 22.00-23.50
1 16QAM 22.50-24.00 Appendix A for US
3 22.50-23.50
6 21.50-22.50

Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 7
20 MHz
1
QPSK
21.00-23.00
50 21.00-22.50
100 21.00-22.50
1
16QAM
21.00-23.00
50 20.00-21.50
100 20.00-21.50
15 MHz
1
QPSK
21.50-23.00
36 21.00-22.50
75 21.00-22.50
1
16QAM
20.00-22.50
36 20.00-21.50
75 20.00-21.50
10 MHz
1
QPSK
21.00-23.50
25 21.00-22.50
50 21.00-22.50
1
16QAM
20.00-22.50
25 20.00-21.50
50 20.00-21.50
5 MHz
1
QPSK
21.00-23.00
12 21.00-22.50
25 21.00-22.50
1
16QAM
20.00-22.50
12 20.00-21.50
25 20.00-21.50

Mode
Bandwidth
RB Modulation Range(dBm)
LTE Band 12 10 MHz
1
QPS

Leave a Comment