Samsung – ATIV Smart PC (AT&T) – User Manual

Category: Multimedia Tablet, Graphic Tablet, and eReader User Guides and Manuals

Download user manual for Samsung – ATIV Smart PC (AT&T) – User Manual 
Preview: Below is a preview of the manual as extracted from the PDF file


User Guide1
Chapter 1
Getting Started
Contents
Chapter 1. Getting Started
3 Before You Start
6 Safety Precautions
21 Proper Posture During Computer Use
24 Overview
30 Turning the Computer On and Off Chapter 2. Using Windows 8
33 What is Microsoft Windows 8?
34 Screen At a Glance
36 Using the Charms
38 Using Apps
42 Windows Hot Key Function
Chapter 3. Using the computer
44 Using the Touch Screen (For touch screen models
only)
52 Using the Touch Supporter (For touch screen models
only) (Optional)
54 Micro SD Card Slot (Optional)
56 Connecting an External Display Device
59 Adjusting the Volume
61 LCD Brightness Control
62 Wireless Network (Optional)
64 NFC (Near Field Communication) (Optional)
66 Using the Keyboard Dock (Optional)
72 Using the Multimedia App (Optional)
76 Using the S Note app (S Note, Optional)
80 Sharing content using the AllShare Play app
(Optional)
89 Samsung Software Update
90 Diagnosing the Computer Status and Troubleshooting
91 Battery
94 BIOS Setup
Chapter 4. Troubleshooting
97 Recovering the Computer (Optional)
100 Q&A
Chapter 5. Appendix
106 Important Safety Information
108 Replacement Parts and Accessories
110 Regulatory Compliance Statements
126 WEEE Symbol Information
127 Samsung Packaging Take-Back Program
128 TCO Certifie d
129 Product Specification s
131 Glossary
135 IndexBefore You Start 3
Safety Precautions 6
Proper Posture During Computer Use 21
Overview 24
Turning the Computer On and Off 30
Chapter 1.
Getting Started3
Chapter 1
Getting Started
Before You Start
Before reading the User Guide, first check the following
information.
Optional items, some devices and software referred to in •
the User Guide may not be provided and/or changed by
upgrade.
Note that the computer environment referred in the User
Guide may not be the same as your own environment.
The pictures used for the cover and the main body in the •
User Manual are those of the representative model of each
series and may differ from the actual appearance of the
product.
This guide decribes procedures for using both the mouse •
and the S Pen.
In this manual ‘click’ means ‘one press with the S Pen’.
The User Guide describes information on the basis of the •
touch screen.
This manual has been written for the Windows 8 operating •
system. The descriptions and figures may differ depending
on the installed operating system.
The User guide supplied with this computer may vary •
depending on your model.
Software Usage Instructions
In the • Start screen, slightly drag the top edge of the
screen toward the center.
Click the corresponding program in the All Apps
menu item.
Alternatively, start the program from Quick Starter.
You can install • Quick Starter through the SW Update.4
Chapter 1
Getting Started
Before You Start
Safety Precaution Notations
Icon Notation Description
Warning
Failure to follow instructions marked with
this symbol, may cause personal injury
and or fatality.
Caution
Failure to follow instructions marked with
this symbol, may cause slight injury to
yourself or damage your property.
Text Notations
Icon Notation Description
Caution
Content included in this section includes
information required about the function.
Note
Content included in this section includes
helpful information to use the function.
Copyright
© 2012 Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. owns the copyright of this manual.
No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, without the
consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without
notice due to improving the performance of the product.
Samsung Electronics shall not be liable for any data loss. Please
take care to avoid losing any important data and backup your data
to prevent any such data loss.
OS and Software Support
If you change the product’s factory OS (Operating System) to
another OS or if you install software which is not supported by the
product’s original factory OS, you will not receive any technical
support, product exchange or refund. And a fee will be charged
when requesting a service.
Please use your computer with the original factory OS. If you
install an OS other than the factory OS, data may be deleted or the
computer may not start. 4 5
Chapter 1
Getting Started
Performance Information and Restriction
Online games and some games(3D,2D) may not be supported •
and Full HD video and some high bit rate HD video playback
may be slow and stutter on this computer.
If the main board goes out of order, the data saved on the •
storage device cannot be used due to the characteristics of this
product.
Make sure that you always back up all your important data.
About the Product Capacity Representation
Standard
About the capacity representation of the storage
The capacity of the storage device (HDD, SSD) of the manufacturer
is calculated assuming that 1KB=1,000 Bytes.
The operating system (Windows) calculates the capacity of the
storage device assuming that 1KB=1,024 Bytes, and therefore
the representation of the storage device capacity in Windows
is smaller than the actual capacity due to the difference in the
capacity calculation.
(E.g. For an 80GB storage device, the capacity is represented as
74.5GB by the operating system. 80×1,000×1,000×1,000 byte/
(1,024×1,024×1,024)byte=7 4.505GB)
Windows may also display a smaller hard disk capacity due
to some hidden functions or software programs such as the
Recovery program.
About Memory Capacity Representation
The memory capacity reported in Windows is less than the actual
capacity of memory.
This is because BIOS or a video adapter uses a portion of memory
or claims it for further use.
(E.g. For 1GB(=1,024MB) memory installed, Windows may report
the capacity as 1,022MB or less)
Before You Start6
Chapter 1
Getting Started
Installation Related
Do not install the product in places exposed
to humidity such as a bathrooms.
There is a danger of electric shock. Use the
product within the operating conditions
specified in the Manufacturers User Guide.
Keep the plastic bags out of the reach of
children.
There is a danger of suffocation.
Keep a distance of 15cm or more between
the computer and the wall and do not place
any objects between them.
This may increase the internal temperature of
the computer and may cause an injury.
Safety Precautions
Do not install the computer on a slant or a
place prone to vibrations, or avoid using the
computer in that location for a long time.
This increases the risk that a malfunction or
damage to the product will occur.
Be careful that people are not exposed to
the computer’s ventilator, adapter, etc., as
they generate heat over a long period of
time when your PC is powered on.
Exposing a part of your body close to the heat
from the vent or AC adapter for long periods of
time may cause a burn.
Avoid blocking the vent at the bottom or
side of the computer when using it on a bed
or cushion.
If the vent is blocked, there is a danger of
damaging the computer or overheating the
inside of the computer.
For your security and to prevent damage, please read the
following safety instructions carefully.
Since this is commonly applied to Samsung Computers,
some pictures may differ from actual products.
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Ver 3.26 7
Chapter 1
Getting Started
G If the power cord or power outlet makes a
noise, disconnect the power cord from the
wall outlet and contact a service center.
There is a danger of electric shock or fire
hazard.
Do not use a damaged or loose main plug or
power cord or power outlet.
There is a danger of electric shock or fire
hazard.

Plug the power cord firmly into the power
outlet and AC adapter.
Failure to do so may cause fire hazard.

Do not unplug the power cord by pulling
the cable only.
If the cord is damaged, it may cause electric
shock.
Do not bend the power cord excessively or
do not place a heavy object over the power
cord. It is especially important to keep the
power cord out of reach of infants and pets.
If the cord is damaged, it may cause electric
shock or fire.
Power Related
The power plug and wall outlet figures may differ
depending on the country specifications and the product
model.

Do not touch the main plug or power cord
with wet hands.
There is a danger of electric shock.
Do not exceed the standard capacity
(voltage/current) of a multiplug or power
outlet extension when using it for the
product.
There is a danger of electric shock or fire
hazard.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.8
Chapter 1
Getting Started
Connect the power cord to an outlet or
multiple power plug (extended cable) with
a ground terminal.
Failure to do so may result in electric shock.
When the power supply is ungrounded, the
current may leak resulting in electric shock.
If water or another substance enters
the power input jack, AC adapter or the
computer, disconnect the power cord and
contact the service center.
If the notebook computer has an external
type (removable) battery, separate the
battery also.
Damage to the device within the computer
may cause electric shock or fire hazard.
Keep the power cord or outlet clean so that
they are not covered with dust.
Failure to do so may result in fire.
AC Adapter Usage Precautions
Connect the power cord to the AC adapter
firmly.
Otherwise, there is a danger of fire due to an
incomplete contact.
Use only the AC adapter supplied with the
product.
Using another adapter may cause the screen to
flicker.
Do not place heavy objects or step onto
the power cord or AC adapter to avoid
damaging the power cord or AC adapter.
If the cord is damaged, there is a danger of
electric shock or fire.
Unplug the wall-mount AC adapter (adapter
and plug intergrated type) from the wall
outlet while holding the body and pulling it
in the direction of the arrow.
If you unplug the adapter by holding and
pulling the cable, the adapter may be damaged
and an electric shock, explosive sound or spark
may occur as a result.
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Safety Precautions8 9
Chapter 1
Getting Started
Battery Usage Related
Please charge the battery fully before using the
computer for the first time.
Keep the battery out of the reach of infants
and pets, as they could put the battery into
their mouths.
There is a danger of electric shock or choking.
Use an authorized battery and AC adapter
only.
Please use an authorized battery and adapter
approved by Samsung Electronics.
Unauthorized batteries and adapters may not
meet the proper safety requirements and may
cause problems or malfunctions and result in
an explosion or fire.
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Safety Precautions
Do not use the computer in a badly
ventilated location such as on bedding, on a
pillow or cushion, etc, and do not use it in a
location such as room with floor heating as
it may cause the computer to overheat.
Take care that the computer vents (on the side
or the bottom) are not blocked especially in
these environments. If the vents are blocked,
the computer may overheat and it may cause a
computer problem, or even an explosion.
Do not use the computer in a humid
location such as a bathroom or sauna.
Please use the computer within the
recommended temperature and humidity
range (10~32ºC, 20~80% RH).
Do not close the LCD panel and put the
computer into your bag to move it when it is
still turned on.
If you put the computer into your bag without
turning it off, the computer may overheat and
there is a danger of fire. Shut the computer
down properly before moving it.10
Chapter 1
Getting Started
Cutting the power to the internal battery
(for corresponding models only.)
For products with built-in batteries, customers cannot remove •
the battery.
In the case of flooding, lightning or explosions, you can cut •
the battery power by inserting an object such as a paper clip
into the [Emergency Hole] at the bottom of the computer.
Disconnect the AC adapter and insert an object such as a •
paper clip into the hole at the bottom of the computer to cut
the battery power.
In the case of flooding, lightning or explosions, cut
the battery power, do not reconnect the AC adapter,
and immediately contact Samsung Electronics so that
the appropriate countermeasures can be taken.
Never heat the product(or battery) or put
the product(or battery) into a fire. Do not
put or use the product(or battery) in a hot
location such as a sauna, inside a vehicle
exposed to the heat, and so on.
There is a danger of an explosion or fire.
Take care not to allow metal objects such as
a key or clip to touch the battery terminal
(metal parts).
If a metal object touches the battery terminals,
it may cause excessive current flow and it may
damage the battery, or result in a fire.
If liquid leaks out of the product(or battery)
or there is a funny smell coming from
the product(or battery), remove the the
product(or battery) the computer and
contact a service center.
There is a danger of an explosion or fire.
To use the computer safely, replace a dead
battery with a new, authorized battery.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.10 11
Chapter 1
Getting Started
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Thereafter, if you connect the AC adapter, the battery power •
will be supplied again.
Do not cut the battery power under normal •
conditions.
This may result in data loss or a product •
malfunction.
The location of the Emergency Hole may differ depending
on the model.
Usage Related
Disconnect all cables connected to the
computer before cleaning it. If your
notebook is external & removable battery
type, remove the external battery.
There is a danger of electric shock or damage
to the product.
Do not connect a phone line connected to a
digital phone to the modem.
There is a danger of a electric shock, fire or
damage to the product.
Do not place any container filled with water or
chemicals over or near the computer.
If water or chemicals enter the computer, this
may cause fire or electric shock.
If the computer is broken or dropped,
disconnect the power cord and contact a
service center for a safety check.
If the notebook computer has an external
type (removable) battery, separate the
battery also.
Using a broken computer may cause electric
shock or fire hazard.12
Chapter 1
Getting Started
Upgrade Related
Never disassemble the power supply or AC
adapter.
There is a danger of electric shock.
When removing the RTC (Real Time Clock)
battery, keep it out of the reach of children
as they could touch and/or swallow it.
There is a danger of choking. If a child has
swallowed it, contact a doctor immediately.
Use only authorized parts (multi-
plug, battery and memory) and never
disassemble parts.
There is a danger of damaging the product,
electric shock or fire hazard.
Shut down the computer and disconnect
all cables before disassembling the
computer. If there is a modem, disconnect
the phone line. If your notebook is external
& removable battery type, remove the
external battery.
Failure to do so, may cause electric shock.
Avoid direct sunlight when the computer
is in an air-tight location such as inside a
vehicle.
There is a danger of a fire hazard. The computer
may overheat and also present opportunity to
thieves.
Do not use your computer for long
periods of time while any part of your
body is making direct contact with it. The
temperature of the product may increase
during normal operation.
This may result in harming or burning your skin.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.12 13
Chapter 1
Getting Started
When carrying the notebook computer
with other items, such as the adapter,
mouse, books etc, take care not to press
anything against the notebook computer.
If a heavy object is pressed against the
notebook computer, a white spot or stain may
appear on the LCD. Therefore, take care not to
apply any pressure to the notebook.
In this case, place the notebook computer in
a separate compartment away from the other
objects.
Security and Movement Related
Follow the instructions for the relevant
location (e.g. airplane, hospital, etc.) when
using a wireless communication device
(wireless LAN, Bluetooth, etc.).
Avoid exposing a drive to magnetic fields.
Security devices with magnetic fields in –
clude airport walk-through devices and se-
curity wands.
The airport security devices that check car-
ry-on luggage, such as conveyor belts, use
x-rays instead of magnetism and will not
damage a drive.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.14
Chapter 1
Getting Started
Safety Precautions
Installation Related
Do not block the ports (holes), vents, etc. of the product and
do not insert objects.
Damage to a component within the computer may cause electric
shock or fire.
When using the computer with it lying on its side, place it so
that the vents face upwards.
Failure to do so, may cause the internal temperature of the
computer to rise and the computer to malfunction or halt.
Do not place a heavy object over the product.
This may cause a problem with the computer. In addition, the
object may fall and cause injury, or damage the computer.
Battery Usage Related
Dispose of worn-out batteries properly.
There is a danger of fire or explosion. •
The battery disposal method may differ depending on •
your country and region. Dispose of the used battery in an
appropriate way.
Do not throw or disassemble the battery and do not put it
into water.
This may cause an injury, fire or explosion.
Use only a battery authorized by Samsung Electronics.
Failure to do so may cause an explosion.
Avoid contact with metal objects such as car keys or clips
when keeping or carrying a battery.
Contact with a metal may cause excessive current and a high
temperature and may damage the battery or cause a fire.
Charge the battery according to the instructions in the manual.
Failure to do so, may cause an explosion or fire from damage to
the product.
Do not heat the product(or battery) or expose it to heat (e.g.
inside a vehicle during the summer).
There is a danger of explosion or fire.
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.14 15
Chapter 1
Getting Started
Usage Related
Do not place a candle, light cigar, etc. over or on the product.
There is a danger of fire.
Use a wall outlet or multi-plug with a grounding part.
Failure to do so may cause electric shock hazard.
Make sure to have the product tested by a safety service
engineer after repairing the product.
Authorized Samsung Repair Centers will carry out safety checks
after a repair. Using a repaired product without testing it for
safety may cause an electric shock or fire.
In case of lightning, immediately turn the system off,
disconnect the power cord from the wall outlet and phone
line from modem. Do not use a modem or phone.
There is a danger of electric shock or fire.
Do not use your computer and AC-Adapter on your lap or
soft surfaces.
If the computer temperature increases, there is a danger of
burning yourself.
Connect only permitted devices to the connectors or ports
of the computer.
Failure to do so, may cause electric shock and fire.
Close the LCD panel only after checking if the notebook
computer is turned off.
The temperature may rise and it may cause overheating and
deformation of the product.
Do not press the Eject Button while the CD-ROM drive is in
operation.
You might lose data and the disk might be suddenly ejected and
could cause an injury.
Take care not to drop the product while using it.
This may cause personal injury or loss of data.
Do not touch the antenna with electricity facility such as the
power outlet.
There is a danger of electric shock.
When handling computer parts, follow the instructions on
the manual supplied with the parts.
Failure to do so, may cause damage to the product.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.16
Chapter 1
Getting Started
If the computer emits smoke, or there is a burning smell,
disconnect the power plug from the wall outlet and contact
a service center immediately. If your notebook is external &
removable battery type, remove the external battery.
There is a danger of fire.
Do not use a damaged or modified CD.
There is a danger of damaging the product or personal injury.
Do not insert your fingers into the PC Card Slot.
There is a danger of injury or electric shock.
Use recommended computer cleansing solution when
cleaning the product and only use the computer when it is
completely dried.
Failure to do so may cause electric shock or fire.
Emergency disk eject method using paperclip should not
be used while the disk is in motion. Make sure to use the
emergency disk eject method only when the Optical Disk
Drive has stopped.
There is a danger of injury.
Do not place your face close to the Optical Disk Drive tray
when it is operating.
There is a danger of injury due to an abrupt ejection.
Check CDs for cracks and damage prior to use.
It may damage the disc and cause disorder of device and injury of
user.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.16 17
Chapter 1
Getting Started
Upgrade Related
Take care when touching the product or parts.
The device may be damaged or you may be injured.
Take care not to throw or drop a computer part or device.
This may cause injury or damage to the product.
Make sure to close the computer cover before connecting
the power after a reassembly.
There is a danger of electric shock if your body touches an
internal part.
Use parts authorized by Samsung Electronics only.
Failure to do so, may cause fire or damage the product.
Never disassemble or repair the product by yourself.
There is a danger of electric shock or fire.
To connect a device that is not manufactured or authorized
by Samsung Electronics, enquire at your service center
before connecting the device.
There is a danger of damaging the product.
Security and Movement Related
When moving the product, turn the power off and separate
all connected cables first.
The product might be damaged or users may trip over the cables.
For long periods of not using the notebook computer,
discharge the battery and preserve as it is detached.
(For external & removable battery type)
The battery will be preserved at its best condition.
Do not operate or watch the computer while driving a
vehicle.
There is a danger of a traffic accident. Please concentrate on
driving.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.18
Chapter 1
Getting Started
Cautions on Preventing Data Loss
(Storage device Management)
Take care when handling the computer to avoid damaging
the data saved on the storage device.
Please handle the device carefully, as the storage device is •
sensitive and can be damaged by an external shock.
Take extra care, because moving the computer or an impact •
on the computer when it is turned on may damage the data of
the hard disk drive.
Any loss of data from the storage device is the sole •
responsibility of the customer and the company shall not be
held liable.
If the main board goes out of order, the data saved on the •
storage device cannot be used due to the characteristics of this
product.
Make sure that you always back up all your important data.
Cases when the storage device and data can be damaged.
The data may be lost when an external impact is applied to the •
disk while disassembling or assembling the computer.
The data can be lost when the computer is reset (or restarted) •
or is turned off due to a power failure.
The data may be lost and irrecoverable due to a computer virus •
infection.
The data may be lost if the power is turned off while running a •
program.
Moving or applying a force to the computer while the storage •
device is running may damage files or cause bad sectors.
To minimize any loss of data due to damage of the storage
device, make sure to always back up your data.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.18 19
Chapter 1
Getting Started
Safety Precautions
Using the power supply in an airplane
Since the power outlet type differs depending on the type of
airplane, connect the power appropriately.
Since the representative figures of the power plug and
the auto adapter are used, they may differ from the actual
parts.
When using the AC power plug
Connect the power plug pins perpendicular into the center of the
power outlet.
If the plug pins are not inserted into the center of the holes, the •
plug pins are only inserted up to half their length. In this case,
reconnect the power plug.
You have to insert the power plug into the outlet when the •
power indicator (LED) of the power outlet is lit green. If the
power is connected properly, the power indicator (LED)
remains green.
Otherwise, the power indicator (LED) is turned off. In this case,
unplug the power, check if the power indicator (LED) is green,
and then reconnect the power plug.
Wrong Example Good Example
220V Power Plug 110V Power Plug
Center
Holes
Power Indicator (LED)20
Chapter 1
Getting Started
Safety Precautions
When using the auto adapter
When the cigar socket is provided, you have to use the auto
adapter (optional). Insert the cigar plug of the auto adapter into
the cigar socket and connect the DC plug of the auto adapter to
the power input port of the computer.
Auto Adapter
In-flight Cigar Socket Cigar Plug DC Plug
When using the Airplane Charging Converter
Depending on the airplane, you have to use the auto adapter
and charging converter. Connect the airplane charging converter
(optional) to the auto adapter (optional) and then insert the
airplane power input jack into the power outlet.
Charging
Converter
1
Connect this end to
the auto adapter.
Connect the airplane power
input jack to the power
outlet of the airplane.
220 21
Chapter 1
Getting Started
Proper Posture During Computer Use
Maintaining a proper posture during computer use is very
important to prevent physical harm.
The following instructions are about maintaining a proper posture
during computer use developed through human engineering.
Please read and follow them carefully when using the computer.
Otherwise, the probability of (RSI: Repetitive Strain Injury) from
repeated operations may increase and serious physical harm may
be caused.
The instructions in this manual have been prepared so that •
they can be applied within the coverage of general users.
If the user is not included in the coverage, the •
recommendation is to be applied according to the user’s
needs.
Proper Posture
Adjust the heights of desks and chairs appropriate to your
height.
The heights are to be adjusted so that your arm forms a right
angle when you place your hand over the keyboard while sitting
down on a chair.
Adjust the height of chair so that your heel is comfortably placed
on the floor.
Do not use the computer while you are lying down, but only •
while you are sitting down.
Do not use the computer on your lap. If the computer •
temperature increases, there is a danger of burning yourself.
Work while keeping your waist straight. •
Use a chair with a comfortable back. •
Keep the center of your leg weight not on the chair but on •
your feet when you are sitting on a chair.
To use the computer while talking over the telephone, use a •
headset. Using the computer with the phone on your shoulder
is bad for posture.
Keep frequently used items within a comfortable work range •
(where you can reach them with your hands).22
Chapter 1
Getting Started
Proper Posture During Computer Use
Eye Position
Keep the monitor or LCD away from your eyes by at least
50cm.
Adjust the height of the monitor and the LCD screen so that its •
top height is equal to or lower than your eyes.
Avoid setting the monitor and LCD excessively bright. •
Keep the monitor and LCD screen clean. •
If you wear glasses, clean them before using the computer. •
When entering contents printed on a paper into the computer, •
use a static paper holder so that the height of the paper is
almost equal to that of the monitor.
Hand Position
Keep your arm at a right angle as shown by the figure.
Keep the line from your elbow to your hand straight. •
Do not place your palm over the keyboard while typing. •
Do not hold the mouse with excessive force. •
Do not press the touch screen with excessive force. •
It is recommended connecting an external keyboard and •
mouse when using the computer for long periods of time.22 23
Chapter 1
Getting Started
Proper Posture During Computer Use
Volume Control (Headphones and Speakers)
Check your volume first to listen to music.
Check your
volume!
Check if the volume is too loud before using headphones. •
It is not recommended using headphones for long periods of •
time.
Any deviation from the equalizer default setting could cause •
hearing impairment.
The default setting can be changed through software and •
driver updates without your intervention. Please check the
equalizer default setting before first usage.
To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Use Time (Break Time)
Take a break for 10 minutes or more after a 50-minute period •
when working for more than one hour.
Illumination
Do not use the computer in dark locations. The illumination •
level for computer use must be as bright so for reading a book.
Indirect illumination is recommended. Use a curtain to prevent •
reflection on the LCD screen.
Operation Condition
Do not use the computer in hot and humid locations. •
Use the computer within the allowed temperature and •
humidity range specified in the User Guide.24
Chapter 1
Getting Started
Overview
Front View
The pictures used for the cover and the main body in the User
Manual are those of the representative model of each series.
Therefore the colors and appearance of the pictures may
differ from the actual appearance of the product depending
on the model.
3
1 2
5
4
6
1 Illumination Sensor
Using the illumination sensor, the LCD
screen brightness is automatically adjusted
depending on the ambient illumination.
If you cover the illumination sensor with
your hand, the LCD screen will become
dimmer. Therefore, please take care that
you do not cover the sensor when you use
the computer.
2
Camera operating
indicator (Optional)
This indicates the camera operating status.
3 Camera (Optional)
Using this camera, you can take still
pictures and record video.
You can take a picture or make a movie
using the Charms > Start > Camera.
4 Speaker A device used to generate sound.
5 Touch Screen
This is a touch screen that shows the
output from the computer.
6 Home button
검색
공유
시작
장치
설정
Switches the screen between the Start
screen and the currently running app/
program.
If no app/software is currently running,
the Desktop is displayed. 24 25
Chapter 1
Getting Started
Overview
Right View
2
1
1
S Pen (Optional)
A pen used to enter information on the
touch screen.
2
S Pen Slot
(Optional)
You can keep the S Pen in the S Pen slot.26
Chapter 1
Getting Started
Overview
Left View
1
2
1
Volume Control
Button
Controls the volume.
2
Micro Digital
Video / Audio Port
(Micro HDMI)
(Optional)
This is the port for a micro HDMI.
You can enjoy digital video and audio by
connecting the computer to a TV.
You can connect a VGA adapter
(optional).26 27
Chapter 1
Getting Started
Overview
Top View
2 1
3 5 6 7 8 4
1
Ear-set / headset
Jack
This is the jack for connecting an ear-set
or headset.
2 Microphone You can use the built-in microphone.
3 Power Button Turns the computer on and off.
4 Power Button LED
When the computer is on, the power
button LED is lit.
5 Rotation Lock
Locks the screen rotation so that the
screen does not automatically rotate
according to the orientation function of
the product.
6 USB 2.0 Port
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
7
Micro SD Card Slot
This slot is for micro SD cards.
8
SIM Card Slot
(Optional)
This slot is for SIM cards.28
Chapter 1
Getting Started
Bottom View
1 2
1 DC Jack
A jack to connect the AC adapter that
supplies power to the computer.
2
Dock Connector
(Optional)
This connector is for external devices.
Overview28 29
Chapter 1
Getting Started
Rear View
1
2
1 Camera (Optional)
Using this camera, you can take still
pictures and record video.
You can take a picture or make a movie
using the Charms > Start > Camera.
2
NFC Antenna
(Optional)
Provides NFC features for near field
communication for various application
services.
If you replace the bottom of the product, the model name,
serial number and some logos etched into the bottom of the
product will no longer be there.
For more information, please ask for assistance from the
service center.
Overview30
Chapter 1
Getting Started
Turning the Computer On and Off Turning the computer on
1
Connect the AC adapter.
2
Press the Power button to turn the computer on.
3
Power button LED is lit while the computer is turned on.
LED
About Windows Activation
When you turn the computer on for the first time, the Windows
activation screen appears.
Follow the activation procedures according to the instructions on
the screen to use the computer.
Adjusting the screen brightness
When the computer runs on battery power, the LCD brightness is
automatically set to low.
1
Slightly drag from the right edge of the screen toward the
center to display the Charms menu.
2
Increase the bar by pressing the Settings
검색
공유
시작
장치
설정
> Screen .30 31
Chapter 1
Getting Started
Turning the computer off Since the procedures to turn the computer off may differ •
depending on the installed operating system, please turn
the computer off according to the procedures for the
purchased operating system.
Save all your data before clicking on • Shut down.
1
Slightly drag from the right edge of the screen toward the
center to display the Charms menu.
2
Click Settings
검색
공유
시작
장치
설정
> Power

> Shut down.
If you want to power off your computer when you are logged
out, unlock the screen and click Power

> Shut down.
Turning the Computer On and OffChapter 2.
Using Windows 8
What is Microsoft Windows 8? 33
Screen At a Glance 34
Using the Charms 36
Using Apps 38
Windows Hot Key Function 4233
Chapter 2
Using Windows 8
What is Microsoft Windows 8?
Microsoft Windows 8 (hereafter referred to as Windows) is an
operating system that is required for operating a computer.
To use your computer optimally, you need to know how to use it
properly. Therefore, It is better to learn how to use Windows by
utilizing Windows Help and Support.
The screen may appear somewhat different depending on •
the model and the operating system.
Since this guide has been prepared based on Windows •
8, some of the instructions may differ depending on the
version. It may also be modified without prior notice.
Displaying Help
Move the pointer on the screen to the top or bottom right edge of
the screen to view the Charm menu.
Alternatively, slightly drag the right edge inward with your finger
to view the Charm menu.
Select Charm menu > Settings
검색
공유
시작
장치
설정
> Help.
If you are connected to the internet, you can access the most
recent online Help.

Searching
for Help
Get Started
You can view basic instructions on how to use
your computer including new function(s) for the
Windows OS.
Internet &
networking
After connecting to the network, you can check
the Help section required to use the internet.
Security, privacy,
& accounts
You can check the Help information required
to protect your computer and personal
information.34
Chapter 2
Using Windows 8
Screen At a Glance
Windows 8 provides both the new Start screen mode and the
Desktop mode of the existing OS.
Start Screen Desktop
Start Screen
When you turn on the computer, the Start screen is displayed,
which allows you to use the applications (Application, App,
hereafter referred to as an App) at the same location.
5
6
7
4
3
3
2
1
1 Start Screen Refers to the default Start screen of Windows 8.
2 App Refers to the apps that are currently installed.
3
Displaying the
Charms
The Charms is hidden at the right of the
screen. Place your mouse pointer at the edge
of the top or bottom right of the screen to
display the Charms.
Alternatively, slightly drag the right edge
inward with your finger to view the Charm
menu.
4 User Account This refers to the currently used user account.
5 Charms
This refers to the menu that allows you to use
functions such as Search, Share, Start, Device
and Settings.
6 Desktop Switches to Desktop mode.
7 Camera Allows you to take pictures or make a movie.34 35
Chapter 2
Using Windows 8
Screen At a Glance
Desktop
This provides similar functions to those provided by the Desktop
in prior Windows versions.
3
4
2
2
1
1 Desktop Refers to the Desktop.
2
Displaying the
Charms
The Charms is hidden at the right of the
screen. Place your mouse pointer at the edge
of the top or bottom right of the screen to
display the Charms.
Alternatively, slightly drag the right edge
inward with your finger to view the Charm
menu.
3 Charms
This refers to the menu that allows you to use
functions such as Search, Share, Start, Device
and Settings.
4
Switching to the
Start Screen
Click the corner of the bottom left of the
screen to switch to the Start screen.
Displaying Documents and Files
Click Windows Explorer in the taskbar on the Desktop to
search for documents and files.36
Chapter 2
Using Windows 8
The Charms is a new type of menu that combines the Start menu
with the Control Panel of existing Windows.
The Charms allows you to quickly configure the device(s)
connected to your computer, search for App(s)/file(s), and use the
sharing function, etc.
Activating the Charms
Slightly drag the right edge inward with your finger to view the
Charm menu.
Alternatively, tap the top or bottom right edge of the screen to
view the Charm menu.
Charms
Displaying
the Charms
Menu
Displaying
the Charms
Menu
Search
Share
Start
Device
Settings
If you want to search for a program or file in the App(s)/
Settings/File(s), simply enter a keyword in the Search
charm and start Search.
You can also search within an App or on the Web.
Search
Share
Start
Device
Settings
You can use this menu to transfer a picture or file to
another user. You can easily share pictures or files with
other users simply by associating multiple Apps with the
Share charm.
Search
Share
Start
Device
Settings
You can move to the Start screen.
Search
Share
Start
Device
Settings
As this allows you to move directly to a desired device,
you can handle tasks such as importing pictures from
a digital camera, streaming a video to your TV or
transferring files to a device on the current screen.
Search
Share
Start
Device
Settings
The Settings charm allows you to perform basic tasks
such as adjusting the volume, turning off the PC, etc.
If you select the Settings charm while a specific App is
running, the settings for the currently running App are
displayed.
Using the Charms36 37
Chapter 2
Using Windows 8
Using the Charms
Changing the Settings
Frequently used Windows menus are collected.
Click the Charms > Settings.
Icon Name Function Description

Wireless
Network
You can connect to a wireless network.
Select a wireless network to connect
to.

Adjusting the
Volume
You can adjust the volume or mute the
sound.

Screen You can adjust the screen brightness.

Notice
You can set the interval at which an
App sends notices.

Power
You can turn off your computer or
select the Power Options.
한 Keyboard
You can set the Language or launch
Touch keyboard.
Change PC settings
You can change more settings.38
Chapter 2
Using Windows 8
Using Apps
An App refers to an application program (hereafter referred to as
an App). In a larger sense, it refers to all the software programs
installed on the operating system.
Windows 8 provides basic Apps for frequently performed tasks.
Starting/Exiting an App
Click on an App in the Start screen to activate it.
To exit the App
1
Move your mouse pointer to the top of the screen.
Your mouse pointer changes to a hand shape.
2
Click and hold your mouse button and then drag it to the
bottom of the screen. The App moves downward and
disappears and exits.
1
2
Using Apps
You can use the following function with the mouse.
Displaying Currently Running App(s)
1
Move your mouse pointer to the top left corner of the screen
to display the last run App.
2
Then, move your mouse pointer down to display a list of the
currently running Apps in order.38 39
Chapter 2
Using Windows 8
Using Apps
3
Click on an App in that list or drag it to the center of the
screen. Now, you can check the selected App which is
currently running.
Right-click over the App in the list and click Close to exit the
App.
1
2
Running Two Apps at the Same Time
1
Select the Apps in the Start screen.
2
Move your mouse pointer to the top of the screen. Your
mouse pointer changes to a hand shape.
3
If you click and hold your mouse button and move left or
right, you can split the screen to display multiple Apps.
4
Move the Screen Split Bar to change the screen split ratio.
Supported screen split ratios are 3:7 or 7:3.
Ex) If you run the Weather App and Store App at the same time
Screen
Split Bar
Weather
App Store App 40
Chapter 2
Using Windows 8
Adding/Removing an App to/from the Start Screen
In the Start screen, slightly drag the top edge of the screen
inward.
Click All Apps at the bottom of the screen to display all the
Apps that are currently installed.
1
If you right-click over the App to be added, the relevant menu
is activated at the bottom of your screen.
2
Click Pin to start or Unpin from Start .
Ex) When removing an App in the Start screen
1
2
Using the Windows Store
If you run the App Store in the Start screen, the Apps in the
Windows Store are displayed.
However, a Microsoft account is required to purchase App(s) in the
Windows Store.
Continue after registering your Microsoft Account in the
Charms.
Using Apps40 41
Chapter 2
Using Windows 8
Configuring your Microsoft Account
A Microsoft Account allows you to synchronize your settings with
other device(s) running Windows 8 online allowing you to share
file(s) or settings.
You should register a Microsoft Account to download or purchase
App(s) from the Store.
1
Run the Charms and click Settings > Change PC Settings.
2
Click Users > Your account > Switch to a Microsoft
account.
3
Register your account through the following relevant
procedures.
1
2
Using Apps42
Chapter 2
Using Windows 8
Windows Hot Key Function
You can use the following convenient hot keys in Windows 8.
You can use the following function when an external-type
keyboard is connected.
Function Hot Keys Function Description
Displaying the Start
Screen
Windows Key Switches to Start mode.
Displaying the
Desktop
Windows Key + D
Switches to Desktop
mode.
Running the
Charms
Windows Key + C Activates the Charms.
Locking the Screen Windows Key + L Locks the screen.
Opening the Ease
of Access Center
Windows Key + U
Opens the Ease of Access
Center configuration.
Opening the
Second Screen
Settings
Windows Key + P
Opens the External
Monitor Settings menu.
Function Hot Keys Function Description
Opening the
Advanced
Management Tool
Windows Key + X
Opens the Advanced
Management Tool.
Exit App Alt + F4
Exits the currently
running App.Using the Touch Screen (For touch screen models only) 44
Using the Touch Supporter
(For touch screen models only) (Optional) 52
Micro SD Card Slot (Optional) 54
Connecting an External Display Device 56
Adjusting the Volume 59
LCD Brightness Control 61
Wireless Network (Optional) 62
NFC (Near Field Communication) (Optional) 64
Using the Keyboard Dock (Optional) 66
Using the Multimedia App (Optional) 72
Using the S Note app (S Note, Optional) 76
Sharing content using the AllShare Play app (Optional) 80
Samsung Software Update 89
Diagnosing the Computer Status and Troubleshooting 90
Battery 91
BIOS Setup 94
Chapter 3.
Using the computer44
Chapter 3.
Using the computer
You can use the computer using the touch screen only, without using the keyboard and mouse.
The touch screen function is only supported for models which have the function installed at the factory.
Operate the touch screen using your finger or the S Pen. Other tools such as a ballpoint pen are not recognized and using sharp •
objects may damage or scratch the surface of the LCD.
If a S Pen (optional) is provided, you can use the S Pen instead. •
Since touching the touch screen with a conductive material such as a metallic object may cause a malfunction, take care not to •
touch the screen with this kind of object.
Using the Touch Screen
This function is provided by touch screen models running Windows 8 and will only work for some applications. •
In addition, note that the supported functions are dependant on the application. •
You can use the S Pen (optional) as you use your fingers. The descriptions here are for using your fingers. •
Learning basic touch screen operations
You can easily learn how to use the touch screen conveniently.
Touch Operation Function Description
Dragging from the right edge
toward the center
Displays the Charms menu which is hidden at the right of the screen.
Using the Touch Screen
(For touch screen models only)44 45
Chapter 3.
Using the computer
Using the Touch Screen
(For touch screen models only)
Touch Operation Function Description
Dragging from the left edge
toward the center
Displays the last run App.

Dragging from the bottom edge
upward
or
from the top edge downward
Displays the options for the currently running application.

Touching slightly
(Clicking)
Slightly press with your finger to select an item.
(If you slightly touch a specific menu, option, application icon, etc. on
the screen, the corresponding capability is activated.)

Touching twice
(Double-clicking)
Slightly press twice with your finger to select an item.

Touching and dragging
Moves the selected target or moves to the next page.
You can draw a picture or write some letters with this operation.46
Chapter 3.
Using the computer
Touch Operation Function Description
Rotating with more than 2 fingers Rotates the selected target.
Spreading 2 fingers widely
or
bringing them towards each other
Zooms in or out of the target.
Touching and holding for a while
(Right-clicking your mouse)
Provides the same function as right-clicking your mouse button.
Displays the additional options which can be set for the selected
target or more detailed information.
Touching and dragging 2 fingers
up/down, left/right
(Scrolling)
Moves up/down, left/right. Provides the same function as scrolling
your mouse.
Using the Touch Screen
(For touch screen models only)46 47
Chapter 3.
Using the computer
Using the S Pen (optional)
If a S Pen is supplied with the product, you can operate the
computer with the pen instead of your fingers.
You can use the S Pen as you would use your fingers.
Taking Out the S Pen
Take out your S Pen toward the right.
After using the S Pen, keep it in the S Pen slot.
S Pen structure and functions
Pen button
Pen tip
Pen tip
Ring
Pen tip
(Use this to perform the role
of the left mouse button)
This performs the function of your
finger tip when you touch the screen.
Pen button
(Use this to perform the role
of the right mouse button.)
If you press the pen button when the S
Pen tip is on the screen, circles appear
around the pointer on the screen.
Touch the screen with the S Pen while
holding down the pen button.
This performs the right-click function.
Using the Touch Screen
(For touch screen models only)48
Chapter 3.
Using the computer
Using the Touch Screen
(For touch screen models only)
Replacing the pen tip
If the pen tip is damaged, you can replace the pen tip as follows:
1
Hold the pen tip by inserting it into the hole of the ring and
remove the tip by pulling it out.
2
Insert the new pen tip into the S Pen.
Take care so that the pen tip does not spring out when taking
it out.
Screen Calibration
When you use the touch screen for the first time or the pointer
on the screen does not precisely match the points you touch,
calibrate the touch screen using the Tablet PC Settings menu.
The calibration process for the touch screen may differ depending
on the operating system and may not be available in some
operating systems. The following descriptions assume the
Windows 8 operating system.
1
Click Charms menu on the Desktop > Settings
검색
공유
시작
장치
설정
>
Control Panel > Hardware and Sound > Tablet PC
Settings > Calibrate.48 49
Chapter 3.
Using the computer
Using the Touch Screen
(For touch screen models only)
2
Select the screen type to calibrate. If the Calibration screen
appears, touch the point represented by the “+” mark and
then remove your finger.
The “+” mark appears sequentially from the top left to the
bottom right of the screen.
3
When the Do you want to save the calibration data?
window appears, click Yes.
The touch screen input points are calibrated.
Entering Characters
You can enter characters using the keyboard and the Tablet PC
Input Panel.
Entering characters may differ depending on the operating system
and is not supported by some operating systems.
If you are using your computer for a long period of time, it is
recommended using the keyboard.
Entering characters is explained using an example with notepad.
Using the Tablet PC Input Panel
The Tablet PC Input Panel is an onscreen keyboard provided by
Windows.
Follow the descriptions and illustrations on how to use the touch
keyboard and handwriting mode.
1
In the Start screen, slightly drag the top edge of the screen
toward the center.
Press All Apps > Notepad.
2
Put your hand on the Notepad screen to display the cursor.50
Chapter 3.
Using the computer
Using the Touch Screen
(For touch screen models only)
3
On the Desktop, press the at the right of the taskbar to
display the Tablet PC Input Panel.
Touch Keyboard
Touch Keyboard
(displays the Numeric Key Pad in the middle.)
Handwriting Mode
[Input Mode]
Entering characters using the Touch Keyboard
The Touch keyboard has the standard keyboard layout which
allows you to select keys to enter characters.
1
Press the Touch Keyboard icon in the Tablet PC Input
Panel.
2
Press the keys to enter your characters.50 51
Chapter 3.
Using the computer
Using the Touch Screen
(For touch screen models only)
Entering characters in Handwriting Mode
You can enter characters by writing them in the Handwriting
Mode Input Panel on the touch screen.
Handwriting Mode may not be available in some languages.
1
Press the Handwriting Mode icon in Tablet PC Input
Panel.
2
Write characters in the input area of the Handwriting Mode
Input Panel on the touch screen.
3
Press the Insert button to enter characters.
Touch screen use precautions
Use the touch screen with clean and dry hands. In a humid •
environment, remove the moisture from your hands and the
touch screen surface before use.
Avoid directly spraying liquid cleansing solution onto the touch •
screen. The liquid solution may enter the touch screen through
the bottom edge.
When using a liquid cleansing solution, dampen a cloth in
the solution and clean the screen with the cloth (a cleansing
solution or cloth containing abrasives may damage the touch
screen.)
Do not apply a severe impact to the touch screen or press the •
screen with a sharp object such as a ball-point pen.
This may damage the touch screen.
If your finger only touches the touch screen slightly, your touch •
may not be recognized.
If you wish to use a pen, please use the provided S Pen •
(optional). Otherwise, the computer may not work properly.
Take care that you do not drop the S Pen as this may damage •
the pen tip.
When pressing the touch screen, press over an item precisely •
taking care not to press other items.
If the touch screen is contaminated by a foreign substance •
such as a bug or water, the touch screen will not work properly.52
Chapter 3.
Using the computer
Using the Touch Supporter
(For touch screen models only) (Optional)
This program helps you to use functions that cannot be easily
used with touch operations more easily.
The Touch Supporter is not supported in the Start screen.
Launching the Touch Supporter
If you touch the screen with three fingers simultaneously the
touch support program is launched.
Ctrl+C
(Copy)
Ctrl
(Multi Selection)
Ctrl+X
(Cut)
Del
(Delete) Magnifier Settings
Show/Hide
Hotkeys
Ctrl+V
(Paste)
Ctrl+Z
(Undo)
Numeric Keypad
To exit the Touch Supporter, click or touch the screen with
three fingers again.
No. Function Description
1
Hot
key
Ctrl
(Multi
Selection)
This has the same function as the Ctrl key
on the keyboard. If you touch the Ctrl(Multi
Selection) button, the indicator is turned on.
While the Ctrl(Multi Selection) key is
activated , and you touch various files
one by one with your finger, all the pressed
files are selected.
Ctrl+C
(Copy)
Copies the selected item.
Ctrl+X
(Cut)
Cuts the selected item.
Ctrl+V
(Paste)
Pastes the copied or cut item.
Del
(Delete)
Deletes the selected item.
Ctrl+Z
(Undo)
Cancels the last operation.
2 Magnifier
Press the Magnifier button to launch the
Magnifier program. Using this program, you
can magnify a selected section.
3
Numeric
Keypad
If you touch the Numeric Keypad button,
the number and direction keypad is
activated.52 53
Chapter 3.
Using the computer
Using the Touch Supporter
(For touch screen models only) (Optional)
No. Function Description
4 Settings
You can add or move frequently used hot
keys by pressing the Settings button.
You can register up to 10 hot keys and
decide whether to display either the hot key
or the function name to represent the hot
key information.
Using the Numeric Keypad
1
Touch the Numeric Keypad . The Numeric Keypad
appears on the screen.
2
If you touch the buttons on the Numeric Keypad, the
corresponding number or symbol is entered on the screen.
Switches the mode
between the numeric
and the direction key
input modes
To select direction key input mode, touch .
To select numeric key input mode, touch .54
Chapter 3.
Using the computer
Micro SD Card Slot
(Optional)
You can only use the micro SD card slot for micro SD cards.
You can use micro SD cards as removable disks and conveniently
exchange data with digital devices such as a digital camera, digital
camcorder, MP3, etc.
You have to additionally purchase a micro SD card with the •
necessary capacity depending on your requirements.
You can use a micro SD card just like any data storage •
device.
A copyright protection function is not supported.
Since you can lose a card when moving the computer, •
keep the card separately.
The figures used for the description are of a representative •
model. Therefore the figures may differ from the real ones.
Using the card
1
Open the micro SD card slot cover and insert the micro SD
card.
Micro SD Card Slot
2
The following message appears on the top right. Click to
open the folder and click View Files.
If a message appears to notify you of any problem, click the
corresponding window > Continue without Scanning. You
can perform the following process described in No. 3.
3
Windows Explorer runs on the Desktop. You can save, move
and delete data on the corresponding drive.54 55
Chapter 3.
Using the computer
Micro SD Card Slot
(Optional)
To remove a memory card
Press the card until it pops up, then pull it out by holding the end
of the card.
To format a memory card
When using the memory card for the first time, you must format
the card before using it.
Formatting a card deletes all data saved on the card. If the
card includes data, backup the data before formatting it.
1
Click the Windows Explorer icon in the taskbar on the
Desktop.
2
Right-click over a card drive with the touchpad and select
Format.
3
Click Start to the formatting.
To use a card to exchange data with a digital device such •
as a digital camera, formatting the data using the digital
device is recommended.
When you try to use a card, which is formatted in the •
computer, in another digital device, you may have to
format the card again in the device.
If the write-protect tab is in the • Lock position, you cannot
format, write or delete data on the card.
Take care when you insert or remove a micro SD card. The •
micro SD card may be damaged when not treated carefully.56
Chapter 3.
Using the computer
Connecting an External Display Device
If you connect an external display device such as a monitor, TV,
projector, etc., you can view the picture on the wider screen of the
external device when you give a presentation or watch a video or
movie.
Connecting to the monitor port (Optional)
You can experience a wider screen by connecting the computer to
a monitor, TV or projector with a monitor port.
You can give better presentations by connecting the computer to
a projector.
The VGA adapter is optional and to be be purchased.
1
Open the monitor port and connect the VGA adapter.
Connect the VGA cable (15-pin) to the connected VGA
adapter and then connect the other end of the VGA cable to
the D-SUB port of the monitor or the TV.
x
External
Monitor
TV
Projector
z
VGA
Adapter
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
Change your TV to external device mode when connecting to
the TV. 56 57
Chapter 3.
Using the computer
3
Select Charms menu > Devices
검색
공유
시작
장치
설정
> Second Screen.
Select a desired monitor mode.
3&୘ִփ ـࢿ ୙ࢠ ѿءध୘ִփ PC screen only
The contents are only displayed on the PC
monitor (current device).
3&୘ִփ ـࢿ ୙ࢠ ѿءध୘ִփ Duplicate
The contents of the current device are displayed
on the external device as well.
3&୘ִփ ـࢿ ୙ࢠ ѿءध୘ִփ Extend
The screen of the current device is expanded to
the external device.
3&୘ִփ ـࢿ ୙ࢠ ѿءध୘ִփ Second screen only
The contents are displayed only on the screen of
the external device.
Alternatively, to set up dual view:
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fit to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
Connecting through the Micro HDMI port
(Optional)
By connecting the computer to a TV with a HDMI port, you can
enjoy both a high visual quality and a high sound quality.
After connecting a TV through HDMI, you have to configure the
screen and sound.
You have to additionally purchase the HDMI to micro HDMI
cable.
1
Connect the HDMI to micro HDMI cable to the HDMI port of
the T

Leave a Comment