Category: Cell Phone, Smartphone, Flip Phone, Pocket PC, and PDA User Guides and Manuals
Download user manual for Asus – ZenFone Live – User Manual
Preview: Below is a preview of the manual as extracted from the PDF file
First Edition/ January 2017
Model: ASUS_A007 (ZB501KL)
Before you start, ensure that you have read all the safety
information and operating instructions in this User Guide
to prevent injury or damage to your device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Side features Rear features
and light sensor
Micro USB port
• The Nano SIM card slots support LTE,
WCDMA and GSM/EDGE network bands.
• The microSD card slot supports microSD and
microSDXC card formats.
Charging your ASUS Phone
To charge your ASUS Phone:
1. Connect the USB connector into the power
adapter’s USB port.
2. Connect the other end of the micro USB cable
to your ASUS Phone.
3. Plug the power adapter into a wall socket.
• For safety purposes, use ONLY the bundled
power adapter and cable to avoid damaging
your device and prevent the risk of injury.
• For safety purposes, use ONLY the bundled
power adapter and cable to charge your
• The input voltage range between the wall
outlet and this adapter is AC 100V – 240V.
The output voltage of the micro USB cable is
+5.2V 1A, 5.2W.
• When using your ASUS Phone while it is
plugged to a power outlet, the grounded
power outlet must be near to the unit and
• When charging your ASUS Phone through
your computer, ensure that you plug the USB
cable to your computer’s USB 2.0 port.
• Avoid charging your ASUS Phone in an
environment with ambient temperature of
Installing a Nano SIM /MicroSD card
To install a Nano SIM / MicroSD card:
1. Push a pin into the hole on the Nano SIM /
MicroSD card tray to eject it.
2. Insert the Nano SIM or MicroSD card(s) into
the card slot(s).
IMPORTANT: You can only use the Nano SIM2
card or the MicroSD card at a time.
• Do not use sharp tools or solvent on your
device to avoid scratches on it.
• Use only a standard Nano SIM card on your
3. Push the tray to close it
IMPORTANT: When two SIM cards are inserted,
only one SIM card slot supports 4G/3G/2G service.
The other SIM card slot only supports 2G service.
CE RF Exposure Compliance
This device meets the EU requirements (1999/519/
EC) on the limitation of exposure of the general
public to electromagnetic fields by way of health
For body-worn operation, this device has been
tested and meets the ICNIRP guidelines and the
European Standard EN 62209-2, for use with
dedicated accessories. SAR is measured with
this device at a separation of 0.5 cm to the body,
while transmitting at the highest certified output
power level in all frequency bands of this device.
Use of other accessories which contain metals
may not ensure compliance with ICNIRP exposure
CE Mark Warning
CE marking for devices with wireless
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing
Radio and Telecommunications Equipment and
mutual recognition of conformity. The highest CE
SAR values for the device are as follows:
• 0.51 W/kg@10g (Head)
• 1.58 W/kg@10g (Body)
E12261_ZB501KL_UM_Folded_Non-EU.indd 1 2017/2/8 14:05:20Copyright © 2017 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website, and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY
OF ANY KIND. SPECIFICATIONS AND INFORMATION
CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS.
Address: 4F, No.150 Li-Te Rd., Peitou, Taipei,
We declare that the IMEI codes for this product, ASUS
Phone , are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressed in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
ASUSTeK COMPUTER INC.
ZenTalk Fans Forum
Using GPS (Global Positioning
System) on your ASUS Phone
To use the GPS positioning feature on your ASUS
• Ensure that your device is connected to the
Internet before using Google Map or any
• For first-time use of a GPS-enabled app on
your device, ensure that you are outdoors to
get the best positioning data.
• When using a GPS-enabled app on
your device inside a vehicle, the metallic
component of the car window and other
electronic devices might affect the GPS
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen
at high volume levels for long periods.
For France, headphones/earphones for this
device are compliant with the sound pressure level
requirement laid down in the applicable EN 50332-
1:2013 and/or EN50332-2:2013 standard required
by French Article L.5232-1.
ASUS Phone care
• Use your ASUS Phone in an environment with
ambient temperatures between 0 °C (32 °F)
and 35 °C (95 °F).
Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
• Do not remove the non-detachable Li-polymer
battery as this will void the warranty.
• Avoid charging in extremely high or low
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
• Do not remove and replace the battery with a
• Do not remove and soak the battery in water or
any other liquid.
• Never try to open the battery as it contains
substances that might be harmful if swallowed
or allowed to come into contact with
• Do not remove and short-circuit the battery, as
it may overheat and cause a fire. Keep it away
from jewelry or metal objects.
• Do not remove and dispose of the battery
in fire. It could explode and release harmful
substances into the environment.
• Do not remove and dispose of the battery with
your regular household waste. Take it to a
hazardous material collection point.
• Do not touch the battery terminals.
• Risk of explosion if battery is replaced by an
• Dispose of used battery according to the
• Use only the charger supplied with your ASUS
• Never pull the charger cord to disconnect it
from the power socket. Pull the charger itself.
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
• Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between 0
°C (32 °F) and 35 °C (95 °F).
• Do not disassemble the ASUS Phone or its
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shock or fire may result.
• Do not short-circuit the battery terminals with
Operator access with a tool
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
Risk of explosion if battery is
replaced by an incorrect type.
Dispose of used batteries
according to the instructions.
DO NOT throw the battery in
municipal waste. The symbol of the
crossed out wheeled bin indicates
that the battery should not be placed
in municipal waste.
DO NOT throw this product in
municipal waste. This product has
been designed to enable proper
reuse of parts and recycling. The
symbol of the crossed out wheeled
bin indicates that the product
(electrical, electronic equipment
and mercury-containing button
cell battery) should not be placed
in municipal waste. Check local
regulations for disposal of electronic
DO NOT throw this product in fire.
DO NOT short circuit the contacts.
DO NOT disassemble this product.
E12261_ZB501KL_UM_Folded_Non-EU.indd 2 2017/2/8 14:05:21